Audited Supplier
Independent research and development of new products offline selective wave soldering GS-250C
1.The machine set of flux spraying, soldering in one; PCB fixed, solder spot moving to achieve soldering;
2.PCB maximum size of 330*250mm; small footprint, low energy consumption;
3.Manually put the PCB, take the PCB, especially for soldering large-weight PCBA and PCBA with wires;
4.According to the customer's different needs to increase size;
5.With the advantages of selective wave soldering and other soldering technologies;
6.High soldering yield and throughput; low operating costs, low cost of touching tools, process flexibility and versatility
7.Certification: CE,ISO.
8.Control method: Semi-Automatic.
9.Application: Electrical & Electronics Industry/Communication Industry.
Stable soldering quality with no voids and bridges.
The soldering program can be set according to your desired soldering criteria.such as tin transmission, soldering joint fullness, and exposure of component feet.
Solder nozzles can also be customized for your PCB.
1. Flux: mist spraying / line spraying
2. Preheating : Bottom
3. Higher or wider tracks for special sizes of PCB.
4. Solder nozzle inner diameter and shape.
5.Different accessories
1.FLUX SPRAY MODULE
Spray characteristics
Selective sprayer,saves at least 90% flux than traditional spray.Ionic contamination is dramatically reduced.
Spray width can be as small as 2mm to significantly reduce ionic contamination.Needn't clean PCBA.
Two axes servo motor control, high positioning accuracy.
2.SOLDERING MODULE
PCB plate fixed, spray and soldering X/Y/Z axis platform moving for soldering joints.
Different soldering speeds and times can be set for different soldering joints on the same circuit board;
Nitrogen in-line heating of the tin pot ensures good wetting of the nozzles and reduces the tin dross;
Wave height monitoring online;
Equipped with a camera to monitor soldering in real time;
3.THE SOFTWARE FEATURES
(1).Full PC control. All parameters can set in PC and saved to PCB menu, like moving path, solder temperature, flux type, solder type ,n2 temperature etc, best trace-ability and easy to get repeat soldering quality.
(2).Simple programming method, using the picture as a base, just draw lines on the picture to program. Parameters can be optimized for each soldering joint position, such as Z-axis soldering height, crest height, soldering travel speed, tin shrinking speed and time, etc. After the path editing is completed, the program can simulate the time needed for the required soldering. It is convenient for engineers to account for the beats.
(3).Path, temperature, speed, solder material and other data are all saved in one file, which can be exported as an EXCEL file. Parameters can be optimized for each soldering position, such as Z-axis soldering height, wave height, soldering movement speed, shrinking speed and time, and so on. After the path is edited, the program can simulate the time required for soldering.
(4).Soldering coordinate point visual positioning, The whole soldering CCD image visualization to facilitate the whole soldering quality tracking.
4.TRANSPORT MODULE
Manual place and pick of PCBs.
5.SOLDERING ACCESSORIES
Magnetic nozzle unit for easy replacement of nozzles of different sizes, option: customised multi-heads
| specifications | Parameter |
| Overall Dimensions | 1200L*1200W*1720H (mm) |
| Machine frame and cover | Square tubes frame + Door |
| Operating height | 900±20mm |
| Weight | Approx.400KG |
| Power supply | 3 φ 380V 50/60HZ |
| Total power | 8KW |
| PCB PCB parameter | |
| PCB PCB size | Min:60(L)*40(W); Max:330(L)*250(W) (mm) |
| Top component height | Max180mm |
| Bottom component height | Max30mm |
| PCB PCB Weight | Max10Kg |
| PCB PCB Process Edge | >3mm |
| Selective spray system | |
| Spray movement mode | Spray nozzle movement in XYZ axis |
| Spray flux volume | 2L |
| Spray flux add mode | Manual |
| Spray nozzle type | Needle |
| Spray cycle time | 1 Sec/soldered dot(The minimum spray time can be set to 0.2 seconds) |
| Spray movement precision | 0.05mm |
| Spray flow control | pressure gage + flow valve |
| Selective Soldering System | |
| Soldering movement mode | Soldering pot movement in XYZ axis |
| Movement mode | Serve motor + linear rail |
| Solder feeding mode | Manual( Option: auto) |
| Solder capacity | 16KG |
1.Standard Wooden Case with Vacuum Package
Shipping Way:
· By air, for sample and small package, international express like DHL, UPS, EMS...
· By sea, for large package and quantity;
· Other ways as customer requested.
2.Delivery Time:
· With 15 Working Days.
3.Ship date:
· About 10 days after receipt of payment.
We are the original manufacturer of selective wave soldering, with more than 20 years of industry experience, our customers are all over the communications industry, automotive electronics industry, lighting industry, digital industry, aerospace and other industries, we have all kinds of PCBS soldering experience, and we can provide customers with customised solutions, and our team of engineers can design the most suitable machine for you.
Additional Notes:
1.Most of our machines are selective wave soldering machines.
2.Our machines are used in many industries, such as Medical Equipment, Electronic Components, Aerospace, etc.
3.When our machines are used in conjunction with the automatic PCB assembly machine, the work efficiency will be very high.
4.Our machines are equipped with mechanical pump, and you can also choose electromagnetic pump.
