> | Hydraulic overload protection device | > | Air blowing device |
> | Servo motor(Adjustable speed) | > | Independent control cabinet |
> | Digital die height indicator | > | Mis-delivery detection device reserved interface |
> | Slider and mold balance device | > | Photoelectric safety protection device |
> | Electronic cam switch device | > | Oil-gathering silencer |
> | Prejudging counter | > | Electric grease lubrication device |
> | Air source connector | > | Touch (pre-break, prejudge, total count) |
> | Second falling protection device | > | Air cooled chiller |
> | Pneumatic mold pad device | > | Feeder (air, mechanical and NC) |
> | Thin oil lubrication device | > | Leveling machine |
> | Quick die change device (Die lifter, die clamper or die mover) | > | Rack |
> | Upper part hit material device of slider | > | Manipulator |
Press capacity | Impulse position | Slider strokes per minute(S.P.M) | Max mold height | Slider adjustment amount | |
Ton | mm | Swing mode/mm | Full stroke/mm | mm | mm |
200 | 5 | ~100 | ~60 | 450 | 150 |
Slide Area | Bolster Area | Side opening | Servo motor torque | Air pressure | Press accuracy grade |
mm | mm | mm | Nm | kg*cm² | Grade |
750*700 | 900*800 | 700*500 | 12000 | 6 | JIS 1 |

with small deformation
its hardness could reach HRC45 degree or more.
Advantage: perfect wear resistance


all tooth surfaces are treated with medium frequency
Advantage: small wear, high accuracy,long service life
Alloy 42 CrMo Material
Advantage: 1.3 times Stronger than 45 steel


Japanese grade TM-3 sintered copper alloy
Advantage: less failure rate with sawtooth ball
- 9 processing modes are built-in, and each product can select the processing curve most suitable for component processing,So as to achieve high precision, high efficiency and high energy conservation.
- Compared with traditional presses, it has simple structure, high mechanical transmission efficiency and low maintenance cost.
- According to the characteristics of products/materials, the stamping forming speed can be reduced during the material processing to achieve the best forming speed of products/materials. Thus reducing vibration and stamping noise; Improve product accuracy and extend the service life of the mold.
- According to different products, different heights are required. The stroke of the punch can be set arbitrarily, which greatly shortens the stamping time and improves the efficiency.
Wuxi Qiaosen Seiko Mechanical Co., Ltd. is a company integrating R&D, production and sales.
We are precision press machine manufacturer in China.
Export Department is Wuxi Daya Technology Co., Ltd.
QIAOSEN PRESSES is located in Huishan Economic Development Zone, Wuxi, China, covering an area of 100 mu, with more than 100 sets of CNC processing equipment such as vertical and horizontal machining centers, as well as testing instruments for various precision power presses . We mainly produce 15~2000Ton presses,such as mechanical power press machine,servo presses,high-speed presses ,precision metal stamping machinery. And the products are exported to Europe, South America, Africa, Southeast Asia and other countries and regions.
> Training:
Qiaosen provide complete training for our aboard customers through Internet so that operators, supervisors and maintenance team could know well of operation and maintenance as well as simply trouble shootings.
> Maintenance:
Qiaosen in-house maintenance department are responsible for internet inspection and suggestion immediately. If the remote guidance couldn't solve the issue, we will arrange the professional engineers to the door for maintenance by paid service.