Factory Supply 4-20mA Weight Indicator Load Cell Weighing Scale

• Factory Supply 4-20mA Weight Indicator Load Cell Weighing Scale
  Optional 2/3/4-way relay or OC output, relay contact AC 250V/1A, OC output drive 100mA/48V

  Output 4-20mA, 0-20mA, 0-5V, 0-10V, 12bit
  accuracy, drive load ≤ 500 ohms. 485 communication port can execute ModbusRTU protocol or active upload protocol (transmission communication can only choose one)

  Ambient temperature: -20 ~ 50 ° C; relative humidity: ≤ 85% RH; avoid strong corrosive gases.
  AC 100 ~ 240V, 50 ~ 60HZ; power consumption ≤ 5W

  Panel/cabinet, high quality plastic case

  Small size: outer dimensions 96×48 deep 84mm, opening size: 92*45mm

  Big size: outer dimensions 160*80*125mm, opening size: 152*72mm

Parameter Modification Key: In the standby state, long press this key for 3 seconds to enter the parameter modification interface.
Calibration Key: In the standby state, long press this key for 3 seconds to enter the parameter calibration interface.
Add Key: It is used to increase the value in the parameter state setting. Used to switch to view basic information in standby or measurement state. Shift Key/ Clear Key: In the parameter setting state, shift to select the value that needs to be modified. At this time, the selected data bit will flash. In the standby state or the measurement state, it is manual Zero.

1. Can I custom it?
Yes, custom order is highly welcome.
2. Can I order a sample? Is it free?
Yes, The sample is available, but you have to pay for it.
3. What's the leading time?
As a factory, all goods can be dispatched within 1 week.