Audited Supplier
8-10mesh, 10-20mesh, 20-40mesh, 40-80mesh, 325mesh
Muscovite
Well Drilling, Decorations, Cosmetics, Fire Protection, Electric Welding Rod, Coating, Painting, Rubber
10-60 Mesh
Low
HAOGESI
PE Bag
1-3mm, 2-5mm, 10-20MESH, 20-40MESH, 1-3MM
Hebei
25252000
Product Description
Mica is a thermal stable insulating material in the welding-rod coatings industries and also used in caulking compounds, lubricants, greases, dry-powder fire extinguishers, as a thin coating on rubber surfaces to overcome tackiness and sticking, In exterior house paints reduces running and sagging, and improves weatherability. The addition of mica to all types of sealers for porous surfaces (such as wallboard, masonry, and concrete blocks) greatly reduces penetration and improves holdout. The inclusion of mica in road and highway paints improves wearability, gives good adhesion, and reduces flaking and cracking, also used to coat wallpaper because it imparts an attractive silky or pearly luster, used predominantly in paint, plastics and rubberWe supply muscovite, phlogopite, sericite, biotite and mica powder(dry mica powder and wet mica powder).
Chemical composition | SiO2 | Al2O3 | K2O | Fe2O3 | CaO | Na2O | MgO | H2O |
| Contents(%) | 47.32 | 33.25 | 11.82 | 1.81 | 0.03 | 0.96 | 0.91 | 2.7 |
Chemical components
Physical properties:
| Density (g/m3) | Refractive index | Whiteness (%) | Moisture (%) | Radius-thickness ratio | Heat Resistance (° C) | L.O.I. (%) |
| 2.80 | 1.60 | 70-80 | <1% | >60 | 1300 | 2.82-2.9 |
Chemical components:
Components | SiO2 | Al2O3 | MgO | K2O | H2O |
| Contents% | 36-45 | 10-17 | 19-27 | 7-10 | <1 |
| Density(g/cm3) | Transparency (%) | Mosshardness | Whiteness | Refractive index | Coefficient of elasticity (10 6Pa) |
| 2.7-2.9 | 0-25.5 | 2.78-2.85 | 60-70 | 1.6-1.55 | 1394.5-1874 |
chemical components:
| Components | SiO2 | Al2O3 | K2O+Na2O | H2O |
| Contents% | 43.13~49.04 | 27.93~37.44 | 9~11 | 4.13~6.12 |
chemical components:
Components | SiO2 | Al2O3 | K2O | MgO | Na2O | S | P | Burn |
| Contents% | 45.02 | 10.46 | 10.18 | 16.88 | 0.46 | 2.43 | 0.34 | 1.93 |
Wet mica powder physical and chemical indicators:
Size | Screen margin (%) | Sand Content (%) | Bulk density (g/cm3) | Water content (%) | Loss on Ignition (%) | Whiteness | Radius-thickness ratio |
| 125um (120 mesh) | 250um <0.1 125um | <3.0 | ≤1.0 | ≤0.3 | ≤1.0 | ≤4.3 | >70 |
| 90um (160 mesh) | 180um< 0.190um | <5.0 | ≤1.0 | ≤0.25 | |||
| 75um (200 mesh) | 150um< 0.1 75um | <5.0 | ≤0.6 | ≤0.23 | |||
| 45um (325mesh) | 112um< 0.145um | <5.0 | ≤0.5 | ||||
| 38um (400mesh) | 75um< 0.1 38um | <5.0 | ≤0.5 |
Size | Screen margin (%) | Fe contents 1X10" | Sand Content (%) | Bulk density (g/cm3) | Water content (%) | Whiteness | Radius-thickness ratio |
| 900um (20 mesh) | ≤0.5 | ≤400 | ≤0.5 | ≤3.0 | ≤1.0 | >60 | >60 |
| 450um(40 mesh) | ≤0.5 | ≤400 | ≤1.0 | ≤3.0 | |||
| 300um(60 mesh) | ≤0.5 | ≤800 | ≤1.0 | ≤3.0 | |||
| 150um(100mesh) | ≤0.5 | ≤800 | ≤1.0 | ≤0.25 | |||
| 75um (200mesh) | ≤1.0 | ≤800 | ≤1.0 | ≤0.25 | |||
| 45um(325mesh) | ≤2.0 | ≤400 | ≤1.0 | ≤0.22 | |||
| 35um(400mesh) | ≤5.0 | ≤400 | ≤0.5 | ≤0.22 | |||
| 28um(500mesh) | ≤5.0 | ≤300 | ≤0.5 | ≤0.22 | |||
| 23um(600mesh) | ≤5.0 | ≤300 | ≤0.5 | ≤0.22 | |||
| 18um(800mesh) | ≤10.0 | ≤300 | ≤0.5 | ≤0.22 | |||
| 13um(1000mesh) | ≤10.0 | ≤300 | ≤0.5 | ≤0.22 |
| Size | +20 | +40 | +60 | +100 | +200 | +325 | -325 | Sand Content | Iron Content |
| % | PPM | ||||||||
| 20 mesh | 5 | 70±5 | 25±5 | ≤10 | ≤5 | ≤0.5 | ≤100 | ||
| 40 mesh | ≤1 | 55±5 | 40±5 | ≤10 | ≤1 | ≤400 | |||
| 60 mesh | ≤0.01 | ≤1 | 45±5 | 45±5 | ≤15 | ≤1.5 | ≤800 | ||
| 100 mesh | ≤0.01 | ≤1 | 35±5 | 35±5 | ≤35 | ≤1.5 | ≤1000 |
1. It can be used in cosmetic industry.
2. It is prior filler in paint and coating.
3. It is applied in protecting layer of welding rods, conducting wires and electric cables.
4. It is the basic raw material for mica porcelain products.
5. It can be used as suspended substance in fire-fighting dry powder.
6. It can be taken as filler, shelter, lubricating substance, a drawing of patterns in plastics, rubber, asbestos products and sealing materials.
7. It can also be used as filler in insulating materials of high-frequent electric waves and acid-durable products.
8. It can be used as coating in models of forecasting metal, the brightening material in aluminum and paint in electroplating.
