Audited Supplier
per
Flat Gasket
Rubber
Washer
Flat
Nonstand
Rubber Molded Parts
Meet ASTM D2000, Can Be Rosh, Reach Compliance
From 20 ~ 90 Shore a
as Per Request
Customize Size
PE Bag, Carton
8 Days for Sample, 12~18 Days for Mass Production
Smooth Surface with Small Parting Line
no
PE+Carton
1*1*1
China
Product Description
We are ISO factory
We can OEM for you.
We have existing tools for below sizes. If they don't work for you, tell us your size.
| M3 | 3,3mm x 8mm x 1.5 mm | silicone 70 black + clear |
| M3 | 3,3mm x 16mm x 1.5 mm | silicone 70 black + clear |
| M4 | 4,3 mm x 9 mm x 1.5 mm | silicone 70 black + clear |
| M4 | 4,3 mm x 18 mm x 1.5 mm | silicone 70 black + clear |
| M5 | 5,3 mm x 10 mm x 2.0 mm | silicone 70 black + clear |
| M5 | 5,3 mm x 20 mm x 2.0 mm | silicone 70 black + clear |
| M6 | 6,4 mm x 13 mm x 2.0 mm | silicone 70 black + clear |
| M6 | 6,4 mm x 30 mm x 2.0 mm | silicone 70 black + clear |
| M8 | 8,4 mm x 16 mm x 2.0 mm | silicone 70 black + clear |
| M8 | 8,4 mm x 40 mm x 2.0 mm | silicone 70 black + clear |
| M10 | 10,5 mm x 20 mm x 2,5 mm | silicone 70 black + clear |
| M10 | 10,5 mm x 40 mm x 2,5 mm | silicone 70 black + clear |
| M12 | 12,5 mm x 25 mm x 2,5 mm | silicone 70 black + clear |
| M12 | 12,5 mm x 50 mm x 2,5 mm | silicone 70 black + clear |
| #2 Rubber disk A | 8.5 mm x 15 mm x 5 mm | Silicone 50 Yellow |
| #3 Rubber disk B | 8.5 mm x 15 mm x 3 mm | Silicone 70 Black |
| EPDM gasket | 12,5 mm x 20 mm x1,5 mm | Silicone 70 Black |
| EPDM gasket | 12,5mm x 20 mm x 1,5 mm | Silicone 70 Black |
| CR gasket | 3.96 mm x 11.1 mm x 1.58 mm | Neoprene 45-65 Black |
| SCT-OR1 | 8.2 mm x 10.1 mm x 1.2 mm | silicone 70 |
| CR-EX1 | 9.4 mm x 11.5 mm x 1.15 mm | silicone 60 |
| CR-IN1 | 8.6 mmX12.5 mmX1.2 mm | silicone 60 |
| Cutimze size | 5 mm x 20 mm x 3 mm | silicone 60 |
| Inch size 1# | .187x.125x.500" | EPDM 60 black |
| Inch size 2# | .187x .187 x .500" | EPDM 60 black |
| Inch size 3# | .187x .250 x .500 " | EPDM 60 black |
| Inch size 4# | .450x .220 x .375" | EPDM 75 black |
| Inch size 5# | .450x .220 x .500" | EPDM 75 black |
| Inch size 6# | .450x .220 x .625" | EPDM 75 black |
| Inch size 7# | .550 x 1.0x.125 | FKM 70 black |
| AS006 | 1/16" X1/8"X1/4" | Buna-N / Silicone / EPDM 75 BLACK |
| AS010 | 1/16"X1/4"X3/8' | Buna-N / Silicone / EPDM 75 BLACK |
| AS012 | 1/16"X3/8"X1/2" | Buna-N / Silicone / EPDM 75 BLACK |
| AS014 | 1/16"X1/2"X5/8" | Buna-N / Silicone / EPDM 75 BLACK |
| AS019 | 1/16"X13/16"X15/16" | Buna-N / Silicone / EPDM 75 BLACK |
| AS024 | 1/16"X1-1/8"X1-1/4" | Buna-N / Silicone / EPDM 75 BLACK |
| AS027 | 1/16"X1-5/16"X1-7/16 | Buna-N / Silicone / EPDM 75 BLACK |
| AS028 | 1/16"X1-3/8"X1-1/2" | Buna-N / Silicone / EPDM 75 BLACK |
| AS029 | 1/16"X1-1/2"X1-5/8" | Buna-N / Silicone / EPDM 75 BLACK |
| AS032 | 1/16"X1-7/8"X2" | Buna-N / Silicone / EPDM 75 BLACK |
| AS111 | 3/32"X7/16"X5/8" | Buna-N / Silicone / EPDM 75 BLACK |
| AS118 | 3/32"X3/4"X15/16" | Buna-N / Silicone / EPDM 75 BLACK |
| AS126 | 3/32"X3/4"X15/16" | Buna-N / Silicone / EPDM 75 BLACK |
| AS128 | 3/32"X1-1/2"X1-11/16" | Buna-N / Silicone / EPDM 75 BLACK |
| AS132 | 3/32"X1-3/4"X1-15/16" | Buna-N / Silicone / EPDM 75 BLACK |
| AS133 | 3/32"X1-13/16"X2" | Buna-N / Silicone / EPDM 75 BLACK |
| AS134 | 3/32"X1-7/8"X2-1/16" | Buna-N / Silicone / EPDM 75 BLACK |
| AS135 | 3/32"X1-15/16"X2-1/8" | Buna-N / Silicone / EPDM 75 BLACK |
| AS136 | 3/32"X2"X2-3/16" | Buna-N / Silicone / EPDM 75 BLACK |
| AS137 | 3/32"X2-1/16"X2-1/4" | Buna-N / Silicone / EPDM 75 BLACK |
| AS138 | 3/32"X2-1/8"X2-5/16" | Buna-N / Silicone / EPDM 75 BLACK |
| AS139 | 3/32"X2-3/16"X2-3/8" | Buna-N / Silicone / EPDM 75 BLACK |
| AS210 | 1/8"X3/4"X1" | Buna-N / Silicone / EPDM 75 BLACK |
| AS219 | 1/8"X1-5/16"X1-9/16" | Buna-N / Silicone / EPDM 75 BLACK |
| AS220 | 1/8"X1-3/8"X1-5/8" | Buna-N / Silicone / EPDM 75 BLACK |
| AS221 | 1/8"X1-7/16"X1-11/16" | Buna-N / Silicone / EPDM 75 BLACK |
| AS222 | 1/8"X1-1/2"X1-3/4" | Buna-N / Silicone / EPDM 75 BLACK |
| AS225 | 1/8"X1-7/8"X2-1/8" | Buna-N / Silicone / EPDM 75 BLACK |
| AS227 | 1/8"X2-1/8"X2-3/8" | Buna-N / Silicone / EPDM 75 BLACK |
| AS229 | 1/8"X2-3/8"X2-5/8" | Buna-N / Silicone / EPDM 75 BLACK |
| AS230 | 1/8"X2-1/2"X2-3/4" | Buna-N / Silicone / EPDM 75 BLACK |
| AS231 | 1/8"X2-5/8"X2-7/8" | Buna-N / Silicone / EPDM 75 BLACK |
| AS232 | 1/8"X2-7/8"X3" | Buna-N / Silicone / EPDM 75 BLACK |
| AS234 | 1/8"X3"X3-1/4" | Buna-N / Silicone / EPDM 75 BLACK |
| AS235 | 1/8"X3-1/8"X3-3/8" | Buna-N / Silicone / EPDM 75 BLACK |
| AS237 | 1/8"X3-3/8"X3-5/8" | Buna-N / Silicone / EPDM 75 BLACK |
| AS240 | 1/8"X3-3/4"X4" | Buna-N / Silicone / EPDM 75 BLACK |
| AS246 | 1/8"X4-1/2"X4-3/4" | Buna-N / Silicone / EPDM 75 BLACK |
| AS325 | 3/16"X1-1/2"X1-7/8" | Buna-N / Silicone / EPDM 75 BLACK |
| AS326 | 3/16"X1-5/8"X2" | Buna-N / Silicone / EPDM 75 BLACK |
| AS336 | 3/16"X2-7/8"X3-1/4" | Buna-N / Silicone / EPDM 75 BLACK |
| AS337 | 3/16"X3"X3-3/8" | Buna-N / Silicone / EPDM 75 BLACK |
RFQ
Q 1.What's the payment term?
A: We accept T/T 50% deposit and 50% balance against copy of B/L or L/C at sight, West Union,VISA,Paypal is also accepted.
Q 2. What is the normal lead time for product orders?
A: Average lead times for prototype / first article are 7~10 days, if tooling is involved, lead time for production tooling is 10
days, average production time after sample approval is 2-3 weeks.
Q 3. What is your standard packing?
A: All the goods will be packed by carton box and loaded with pallets. Special packing method can be accepted when needed.
Q 4. Could you please tell us the month capacity of your products ?
A: It depends on which model, we produce more than 1500 tons rubber materials per month.
Q 5. what kind of certificates you have ?
A1: We have been ISO9001:2008 certified by SGS since 2019.
A2: We have various rubber compounds approved by KTW, W270, WRAS, ACS, AS4020, EN681, EN549, ROHS and REACH.
Q6: How to check the quality of the bulk order?
A1: We provide preproduction samples before mass production for all customers if needed.
A2: We provide quality certs such as measurement report, material data sheet, COO, COA, etc. to all customers before delivery.
A3: We accept third party inspection such as SGS, TUV, INTERTEK, BV, etc.
Q 7: How to select the raw compound for my application?
A: With years of experience working with a variety of material, we can help select the material that will best suit your needs
while keeping material costs in mind.
Q 8: Do you use any international standards for the rubber products?
A: Yes, we mainly use ASTM D2000 standard to define the quality of the rubber materials, tolerances as per ISO3302, ISO2768, etc.
Q 9:Can you supply different color materials?
A: Yes, we can produce custom molded rubber and silicone rubber products in different colors, the color code will be required in
case of an order.
Q10: What materials are available to produce from your side?
A: NBR, EPDM, SILICONE, FKM(FKM), NEOPRENE(CR), NR, IIR, SBR, ACM, AEM, Fluorosilicone(FVMQ),
A: We accept T/T 50% deposit and 50% balance against copy of B/L or L/C at sight, West Union,VISA,Paypal is also accepted.
Q 2. What is the normal lead time for product orders?
A: Average lead times for prototype / first article are 7~10 days, if tooling is involved, lead time for production tooling is 10
days, average production time after sample approval is 2-3 weeks.
Q 3. What is your standard packing?
A: All the goods will be packed by carton box and loaded with pallets. Special packing method can be accepted when needed.
Q 4. Could you please tell us the month capacity of your products ?
A: It depends on which model, we produce more than 1500 tons rubber materials per month.
Q 5. what kind of certificates you have ?
A1: We have been ISO9001:2008 certified by SGS since 2019.
A2: We have various rubber compounds approved by KTW, W270, WRAS, ACS, AS4020, EN681, EN549, ROHS and REACH.
Q6: How to check the quality of the bulk order?
A1: We provide preproduction samples before mass production for all customers if needed.
A2: We provide quality certs such as measurement report, material data sheet, COO, COA, etc. to all customers before delivery.
A3: We accept third party inspection such as SGS, TUV, INTERTEK, BV, etc.
Q 7: How to select the raw compound for my application?
A: With years of experience working with a variety of material, we can help select the material that will best suit your needs
while keeping material costs in mind.
Q 8: Do you use any international standards for the rubber products?
A: Yes, we mainly use ASTM D2000 standard to define the quality of the rubber materials, tolerances as per ISO3302, ISO2768, etc.
Q 9:Can you supply different color materials?
A: Yes, we can produce custom molded rubber and silicone rubber products in different colors, the color code will be required in
case of an order.
Q10: What materials are available to produce from your side?
A: NBR, EPDM, SILICONE, FKM(FKM), NEOPRENE(CR), NR, IIR, SBR, ACM, AEM, Fluorosilicone(FVMQ),
