Fast Adsorption Rate Calcium Lime Pillar/Granular/Pellet/Columnar

The main content of Minstrong CO2 absorber is Calcium Hydroxide, except for CO2 absorbing, it can also be used as a desiccant (calcium oxide acts as a desiccant), which can be used to dry neutral gases such as oxygen, and can also be used to dry alkaline gases such as ammonia. At the same time, it can also be used to absorb acid gases, such as carbon dioxide and sulfur dioxide. If only sodium hydroxide is present, this desiccant cannot be used at higher temperatures, because sodium hydroxide can react with the most commonly used glass instruments in the laboratory (the main component is silica) and corrode the instruments. A small amount of methane produced in the laboratory can be co-heated with soda lime and sodium acetate (sodium acetate) to generate sodium carbonate and methane.

Application: Used as CO2 Absorber in Medical,diving, mining and safety
 

General Packing: 4.5 KG/16KG/18KG/20KG/40KG in barrel with moisture-proof plastic bag inside, Packing based on user's needs.

For quantity below 10 tons, Minstrong can deliver the CO2 absorber within 7 days.

Shipping Port: Shanghai/other port as request

Air transportation, ocean transportation, railway transportation and truck transportation are available.
 

1) The raw materials and production process of the product are completely independent and controllable, and can be supplied stably for long-term;

2) Anual output higher than 120000 tons;

3)  Minstrong can provide you with professional  application consultation, and design a reasonable exhaust gas treatment solution based on Minstrong's high-performance catalyst;

4)  Minstrong can guide you in the design of process and equipment for free;

5) Minstrong can provide you with the construction of test equipment, as well as the design, manufacture and installation of supporting catalytic reactors;

6) Minstrong can provide you with on-site catalyst loading and debugging guidance.

Minstrong begin catalyst research and production since 1981. We believe, only focus can be professional.

Minstrong Technology Co., Ltd, is a high-tech enterprise with high-performance catalyst research and development and manufacturing as its core business. Minstrong products involve Hopcalite catalysts, carbon monoxide catalysts, ozone destruction catalysts, ozone filter destructor, VOC catalysts, and active manganese dioxide catalysts, activated copper oxide catalysts and other catalyst materials. The catalyst materials are are exported to all over the world, widely used in industrial tail gas treatment, water treatment, health care, electronic information, semiconductor and other industries.

Minstrong has established a complete catalyst research and development system and production process control system.The production process is completely independent and controllable, the product quality is stable.

Minstrong Innovation Center has multiple laboratories and pilot workshops. Based on advanced technology and rich experience, Minstrong can provide you with reliable catalysts and help you achieve the best application of catalysts.

1) Can I get sample?
In order to help you know our products better, our factory would like to offer free sample after mutual communication.

2) How to replace catalysts/absorber of other brands?
Minstrong catalyst and absorber has excellent performance and low bulk specific gravity. You can achieve the same effect by replacing other brand catalysts/absorber with the same volume, and you can save 1/3 of the cost.

3) How do I determine the specification and dosage of the catalyst/absorber?
According to your working conditions, we can select catalysts or absorber with appropriate specifications and calculate reasonable dosages.

4) How can I compare the cost of catalyst/absorber?
Catalysts are not consumable materials, and are generally calculated according to volume. It is necessary to calculate the comprehensive cost of catalysts based on important factors such as specific gravity, catalytic efficiency, and service life, and at the same time assess the technical and service capabilities of suppliers to prevent after-sales risks

5) What should I do if I don't know how to use the catalyst/absorber?
We will design a reasonable process flow according to your working conditions, and provide you with one-stop services such as catalyst selection, test plan formulation, device design and manufacture, and on-site commissioning.

Thank you for your patient reading! We welcome your inquiry.