Audited Supplier
FHQE-1600
Slitting and Rewinding
High-Speed Slitting Machine
Flat Knife Slitting
Cutting Part
Film
Flexible Packaging
Process Materials
Film Cutting
Plastic
BOPP,Pet,CPP,PVC,etc.
PLC
Vector Frequency Inverter
Vector Frequency Converting
400m/Min
Newsun
Export Wooden Case
CE
Ruian
84411000
Product Description
FHQE-1600 High-speed OPP Slitting and Rewinding Machine
USE:
This machine is used to check, rewind and cut all kinds of roll materials such as BOPP, PET, CPP and PVC.
FEATURE:
1) Imported PLC integrated control is used in electrical control system, human-machine communication is carried out by touch screen, Set and display working parameters according to the requirements from different products.
2) Vector frequency-converting is adopted for rewinding, roll diameter is automatically calculated by PLC to achieve automatic tension control.
3) Vector frequency-converting is adopted for winding, active winding, roll diameter is automatically calculated by PLC to achieve automatic tension control.
4) Non-shaft pneumatic system for winding section is used. Width is adjusted by lead screw electrically, convenient load and unloading, high efficiency, automatic correction for winding.
5) Slitting functions: Double tensioning shafts are used for rewinding, straight knife is used for slitting, smooth for the surface, and there is air exhausting device for waste.
6) Functions: Automatic stroboscope to observe printing images is equipped in the system. If there is any defects SAW by eyes, press the button of defects, the button will automatically go back to defect image. (Automatic labeler is optional)
7) In the system, there are calculations of meter, roll diameter, automatic machine stop when lack of material etc.
8) The system has perfect mechanic, electric and pneumatic design, also good safety protection.
Main technical parameters
Sample photos
Workshop&warehouse
USE:
This machine is used to check, rewind and cut all kinds of roll materials such as BOPP, PET, CPP and PVC.
FEATURE:
1) Imported PLC integrated control is used in electrical control system, human-machine communication is carried out by touch screen, Set and display working parameters according to the requirements from different products.
2) Vector frequency-converting is adopted for rewinding, roll diameter is automatically calculated by PLC to achieve automatic tension control.
3) Vector frequency-converting is adopted for winding, active winding, roll diameter is automatically calculated by PLC to achieve automatic tension control.
4) Non-shaft pneumatic system for winding section is used. Width is adjusted by lead screw electrically, convenient load and unloading, high efficiency, automatic correction for winding.
5) Slitting functions: Double tensioning shafts are used for rewinding, straight knife is used for slitting, smooth for the surface, and there is air exhausting device for waste.
6) Functions: Automatic stroboscope to observe printing images is equipped in the system. If there is any defects SAW by eyes, press the button of defects, the button will automatically go back to defect image. (Automatic labeler is optional)
7) In the system, there are calculations of meter, roll diameter, automatic machine stop when lack of material etc.
8) The system has perfect mechanic, electric and pneumatic design, also good safety protection.
Main technical parameters
| Model | FHQE-1300 | FHQE-1600 |
| Max width of raw material(mm) | 1300 | 1600 |
| Max diameter of unwinding(mm) | 1000/1200 | 1000/1200 |
| Max mechanical speed(m/min) | 400 | 400 |
| Max diameter of rewinding(mm) | 600 | 600 |
| Min slitting width(mm) | 40 | 40 |
| Precision of error correction(mm) | ±0.4 | ±0.4 |
| Thickness of raw material(mm) | 0.012-0.2 | 0.012-0.2 |
| Total weight(kgs) | 3500 | 4000 |
| Total power(kw) | 12 | 15 |
| Overall dimension(L*W*H mm) | 3600*4500*1850 | 3600*5100*1850 |
Sample photos
Workshop&warehouse
