Audited Supplier
Our fiberglass chopper gun is an electric spray gun mainly composed of a motor, a spray gun, a transmission system, and a fiberglass cutting machine. This spray gun can quickly and evenly mix and spray fiberglass and resin onto the surface of molds to form strong and durable fiberglass products.
(1) High efficiency: Our fiberglass chopper gun adopts advanced cutting and bidirectional spraying technologies, which can quickly and evenly mix and spray fiberglass and resin onto the surface of molds, improving production efficiency.
(2) Easy operation: Our fiberglass chopper gun is easy to operate, and only requires users to put fiberglass and resin into the equipment and press the button to start spraying, with no need for professional skills.
(3) Good adjustability: Our fiberglass chopper gun can meet different production needs by adjusting spraying speed, fiberglass length, resin volume, and other parameters.
fiberglass chopper gun is suitable for making various fiberglass products, such as boat hulls, storage tanks, water tanks, swimming pools, etc.
| Technical Parameters | Specification |
| Standard Nozzle | 1.4 mm 2.5L-6L/min spray resin |
| Operating Pressure | 0.3-0.6Mpa |
| Pattern Width | 200 to 500 mm |
| Air Consumption | Above 23cfm |
| Paint Tank Operating Pressure | Optimal 25-30 PSI |
| Hose Assembly | 15 meters Hoses |
| Air inlet | 16mm Fluid inlet: 3/8" |
(1) The equipment should be checked for normal operation before use. If there are any abnormal conditions, the equipment should be stopped from use.
(2) Wear protective goggles and gloves during operation to avoid contact with spraying materials.
(3) Clean the equipment in a timely manner after spraying to avoid clogging and damage.
We provide professional after-sales service, including equipment installation, debugging, training, maintenance, etc. Our technical team can respond to customer needs in a timely manner to ensure the normal operation of the equipment and customer satisfaction.
