Audited Supplier
The DMC-100 is FNIRSI's latest 10,000-count intelligent clamp digital multimeter, offering a wider measurement range and higher resolution to help you achieve more accurate measurements. It can precisely measure AC/DC voltage, AC/DC current, and is also capable of testing continuity, capacitance, frequency, resistance, diodes, temperature, NCV (Non-Contact Voltage), and live wires. This device is suitable for use in engineering, laboratories, vehicle maintenance, and household electrical repairs across various electronic fields. The DMC-100 is equipped with a 2.0-inch full-color TFT display with a high resolution of 240*320. The new UI interface design, along with features such as data curves, data storage, and power measurement mode, enrich your user experience, making it easier to read and operate in various scenarios.
Main Specifications of the Device
Model:DMC-100 clamp multimeter
Maximum size of jaws: 25mm
Screen: 2.0'' TFT color screen
Screen resolution:240*320 pixels
Battery capacity: 3.7V, 1500mAh battery
Charging specification: USBType-C, 5V/1A
Product weight: 194g
Product size: 193x74x32mm
Measurement parameters
DC voltage: 9.999V/99.99V/999.9V
AC voltage: 9.999V/99.99V/750.0V
DC current/AC current: 99.99A/600.0A
Resistance: 99.99MΩ/9.999MΩ/999.9KΩ/99.99KΩ/9.999KΩ/999.9Ω
Capacitance: 9.999mF/99.99mF/999.9μF/99.99μF/9.999μF/999.9nF/99.99nF/9.999nF
Frequency: 9.999MHz/999.9KHz/99.99KHz/9.999KHz/999.99Hz/99.99Hz/9.999Hz
Temperature: -55~1300ºC/-67~2372ºF
Diode Measurement: √
On-off test: √
Non-Contact Voltage Check (NCV): √
Zero Fire Wire Check: √
Other Functions
Measuring Mode 1: general measurement
Measuring Mode 2: waveform display
Measuring Mode 3: power measurement
Measurement gear: manual adjustment
Torch: Support
Data Zeroing: Support
Maximum/Minimum Value: Support
Waveform display: Support
Power Calculation: Support
Data Hold: Support
Data Storage and Viewing: Up to 30 groups of data
Language: Chinese/English
Brightness Adjustment: 10-speed adjustment
Temperature unit: ºC/ºF
Auto Power Off: OFF/5min/15min/30m
Firmware Upgrade: Support
1 x DMC-100 Clamp Multimeter 1 x Multimeter Pen 1 x Temperature Probe 1 x Packing box 1 x Instruction Manual |
