Audited Supplier
160mm
PPR
Hard Tube
Thermoplastic Pipe
Green, Grey, White, or Based Your Request
Hollow
Round
Water Supply Pipe, Wire and Cable Pipe, Agricultural Irrigation Pipe
Pn20
ISO9001
DIN8077/8078
Paper Cartons and PP Bag
OEM or Fosite
PP Bags
20mm,25mm,32mm,40mm,50mm,63mm,75mm90mm,110mm,160mm
China
39174000
Product Description
DIN8077/8078 32mm PN20 hot water ppr plumbing pipes ,DIN8077/8078 32mm PN20 hot water ppr plumbing pipes ,PPR PIPE
DIN8077/8078 32mm Pn20 Hot Water PPR Plumbing Pipes,Green Pprc Pipe Fitting, White PPR Accessories, Cheap 1/2" PPR Material, Kenya PPR Pipe and Fitting,
160mm Green PPR Plumbing
Germany Standard Water Plumbbing Supply Ppr Pipe Factory Plastic Polypropylene Pipe Ppr Plumbing Green Pn20/25 Ppr Pipes 
DIN8077/8078 32mm Pn20 Hot Water PPR Plumbing Pipes,Green Pprc Pipe Fitting, White PPR Accessories, Cheap 1/2" PPR Material, Kenya PPR Pipe and Fitting,
160mm Green PPR Plumbing
Germany Standard Water Plumbbing Supply Ppr Pipe Factory Plastic Polypropylene Pipe Ppr Plumbing Green Pn20/25 Ppr Pipes
- Color : white,green,gray or as your request
- Brand: fosite or OEM
- Pressure rate: PN25 for all ppr fittings
- Connect way: Melt welding or female
- Material: R200P ,4220
- Application: water supply system
- Certification: CE,ISO,BV,Soncap certification
- PPR pipe size:20,25,32,40,50,63,75,90,110,160
- PPR Pipe pressure rate: 1.0Mpa ,1.6Mpa.2.0Mpa.2.5Mpa
Advantages:
1. High Temperature Resistance: the maximum sustained working temperature is up to 70 Degrees Celsius, the maximum transient temperature is up to 95 Degrees Celsius
2. Heat Preservation: low thermal conductivity which is only 1/1500 of brass pipe, and 1/250 of steel pipe
3.Non-toxic: no heavy metal additives, would not be covered with dirt or contaminated by bacterium
4.Corrosion Resistant: resist chemical matters or electron chemical corrosion
5.Lower Installation Costs: light weight and ease of installation can reduce installation costs by as much as 50% over metal piping system
6.Higher Flow Capacity: smooth interior walls result in lower pressure loss and higher volume than metal pipes
7.Long Life: more than 50 years under normal conditions
8.Recycled and Environment-friendly
All pipes and fittings produce with 100% virgin material .
1. High Temperature Resistance: the maximum sustained working temperature is up to 70 Degrees Celsius, the maximum transient temperature is up to 95 Degrees Celsius
2. Heat Preservation: low thermal conductivity which is only 1/1500 of brass pipe, and 1/250 of steel pipe
3.Non-toxic: no heavy metal additives, would not be covered with dirt or contaminated by bacterium
4.Corrosion Resistant: resist chemical matters or electron chemical corrosion
5.Lower Installation Costs: light weight and ease of installation can reduce installation costs by as much as 50% over metal piping system
6.Higher Flow Capacity: smooth interior walls result in lower pressure loss and higher volume than metal pipes
7.Long Life: more than 50 years under normal conditions
8.Recycled and Environment-friendly
High quality brass insertd details ,could working with pressure up to PN25 .
1.PPR Pipe package with PP bag ,
2.PPR fittings with pp small bag ,outsides with paper boxes ,
PPR Material pysical sheet :
| Properties | Typical Value |
| Specific Gravityg/cm³(20ºC) | 0.89~0.91 |
| Tensile StrengthMPa | ≥20 |
| Modulus of ElasticityN/mm²(20ºC) | 800 |
| Thermal Conductivityw/(m·k)(20°ºC) | 0.23~0.24 |
| Coefficient of Linear Expansionmm/(m·k) | 0.14~0.16 |
| Longitudinal Reversion%(135ºC,2h) | ≤2 |
Hydraulic Pressure Test: 20ºC,1h, Hoop Stress is 16MPa No Failure 95ºC1000h,Hoop Stress is 3.5MPa No Failure 110ºC8760h,Hoop Stressis1.90MPa No Failure |
| Note: The plastic fittinas should be adopted threaded metal fittinas with corrosion resistance when thev are intended to connect with metal pipe and water transportation device |
PPR pipes and fittings joint ways , So easy :
HEBEI Shentong Plastic Industry Co., Ltd. Was established in 2003, which is an enterprise concentrating manufacturing PLASITC pipes and fittings. The leading products are Fosite Brand PP-R PIPE AND FITTING, HDPE PIPE AND FITING, UPVC pipe and fittings, PE-RT, PEX pipes & fittings and plastic tubing welding equipment. It has advanced automatic machines.
We pursuit the quality is the first and the service is also important. Shentong has passed ISO9001, ISO4001. We have our own test lab for quality .
1.How to get free samples ?
A: Send your address ,your telphone number ,post code ,and express account number to our mail box ,and tell us which model of samples you need .
2.Who pay for the express cost ?
A: We can support you free samples each model 1-3 pcs ,and we do not pay for express cost .
3.What is your packing?
A: Usually plastic bags,carton,can be packed as your requirement.
My Trade Manager will on line 12 hours everyday, if any question, feel free to chat with us.
You may also click "contact supplier" to send email to us, we will reply you as soon as possible.
4Your lead time :
Within 15 working days for one full 40ft container .
5.Your contact information :
My email :lisa@shentongsuye(dot)com
Service online whole days .
4Your lead time :
Within 15 working days for one full 40ft container .
5.Your contact information :
My email :lisa@shentongsuye(dot)com
Service online whole days .
