Audited Supplier
FB-062
CE
Hand
Single Flame
Standard
Welding Torch
Piezo Ignition
Normal and Jet Flame Lighter
30mins
200-480 Degree
Soldering
Pure Butane
Spray Paint or Electroplating
Gas Welding Iron,Gas Solidering Iron
OEM, ODM
Color Box
China
Product Description
1 x Wireless Butane soldering pen
5 x Needle tip, Knife tip, Anvil tip, Chisel tip, Deflector Tip
1 xProtective Cap
1 x Sponge For Easy Cleanup
1 x Solder Tin wire
Applications:
General heating and drying application. Electrical/Electronic circuit repair Light gauge welding, brazing Jewelry, eyeglass frame
repair Model building Arts and crafts dental wax correction Thawing frozen locks PVC bending PVC preheat flux Heat test electronic
components
repair Model building Arts and crafts dental wax correction Thawing frozen locks PVC bending PVC preheat flux Heat test electronic
components
Instruction:
1.Fill with gas after confirming the switch has been turned off.
2.Fill with gas as picture 1.Lead the gas tank to the filling hole and press to fill.
3.It takes about 10 seconds to complete the filling. Wait several minutes to let the gas be steady before use.
4.Please press the air intake lightly if there is ZIZI noise after filling.
5.Turn on the switch until you hear ZIZI noise as picture 2.
6.Move the flameout ring forward as picture 3.
7.Fire the tip with lighter as picture 4
8.The flame become larger when move to '+',smaller when to '- '.
9.Begin to use when the flame disappears and the tip turns red. The flame should not be too large so as to prolong the service
life.
10.The length of the flame is about 12 mm to 15 mm.
2.Fill with gas as picture 1.Lead the gas tank to the filling hole and press to fill.
3.It takes about 10 seconds to complete the filling. Wait several minutes to let the gas be steady before use.
4.Please press the air intake lightly if there is ZIZI noise after filling.
5.Turn on the switch until you hear ZIZI noise as picture 2.
6.Move the flameout ring forward as picture 3.
7.Fire the tip with lighter as picture 4
8.The flame become larger when move to '+',smaller when to '- '.
9.Begin to use when the flame disappears and the tip turns red. The flame should not be too large so as to prolong the service
life.
10.The length of the flame is about 12 mm to 15 mm.
After sale service guarantee:
1. We will ensure that your goods arrived safely delivered to your hand, to provide you with the best logistics and transportation
services. 2. If you don't know the method of use, please tell us, we will give you answer. 3. Commitment to the warranty, if the
machine fails, use 7 days so you can return the machine, we will repair it send back to you. If machines use a failure within half
a year, we will be the next in order for you to change the new parts.
services. 2. If you don't know the method of use, please tell us, we will give you answer. 3. Commitment to the warranty, if the
machine fails, use 7 days so you can return the machine, we will repair it send back to you. If machines use a failure within half
a year, we will be the next in order for you to change the new parts.
