Fully Automatic Salt Density Tester, Intelligent Conductivity Salt Density Tester, Direct Reading Insulator Detector

Intelligent conductivity salt density tester, also known as direct reading equivalent salt density tester, is designed specifically for testing intelligent conductivity salt density. The system is equipped with an intelligent conductivity salt density calculation formula, which provides intuitive readings.

The human-computer interaction adopts a true color TFT LCD screen, which is easy to operate, and the test parameters and results are clear at a glance. The instrument comes with a micro printer for easy data storage and comparison. Provide two power supply methods: external power supply and built-in battery, making it convenient for laboratory and field testing.
 
This instrument is suitable for salt density testing of external insulation equipment in places such as overhead power lines, power plants, and substations.

Measuring range 
Salt density: 0.0001~9.9999 mg/cm ²
Temperature: 0~100 ºC
Conductivity: 0~100000 us/cm
 
measurement accuracy 
Salt density: resolution of 0.001 bits, full-scale accuracy better than ± 1%
Temperature: Resolution of 0.1 bits, accuracy better than ± 0.5 ºC
Conductivity: The resolution is 1/1000 of the electrode range used, and the full-scale accuracy is better than ± 1%
 
Information output method
TFT LCD: 320 × 240 true color TFT LCD screen, achieving good human-computer information interaction
Printer: Local printer directly prints measurement data
USB communication: Connect the USB port to the PC end and read measurement data in USB mode
 
Usage conditions
Power supply: AC: 220V ± 10%
DC: 6 No. 5 1.5V dry batteries
Environmental temperature: 0~+50 ºC
Relative humidity: ≤ 80% RH
 
Storage conditions
Environmental temperature: -10~+55 ºC
Relative humidity: ≤ 95% RH
Appearance parameters

Functional Features
1. Direct reading format, no conversion required. The salt density on the surface of the insulator is directly displayed.
2. Imported platinum electrodes are used. Stable and reliable performance.
3. The salt density measurement range is 0.0001mg/cm ² -9.9999mg/cm ², with a resolution of 0.0001 bits.
4. It can simultaneously measure other parameters such as conductivity and temperature of the solution.
5. Automatic range switching improves accuracy at low salt densities.
6. Equipped with temperature automatic compensation function, the solution conductivity value is automatically compensated to the value at 20 ºC.
7. Equipped with system automatic verification function, it automatically verifies upon startup to improve measurement accuracy.
8. Built in large capacity data storage, capable of storing over 10000 sets of measurement data.
9. The instrument is equipped with a micro printer, which facilitates accurate, authentic, and effective recording of results on site.
10. The instrument is powered by two options: external power supply and internal battery, making it convenient for laboratory or field use.
11. Adopting a 320 × 240 true color TFT LCD screen. (Customizable English display)
12. Human computer interaction interface, simple operation.
13. The display screen has an automatic backlight reduction function without operation, which can save electricity and reflect the concept of green environmental protection.