All intelligent box type microfilter is made of non-toxic and corrosion-resistant food grade PP material. It is mainly composed of box assembly, drum assembly,reverse cleaning system, electric control box system and transmission system. The water flow is less than or equal to 10m³/h. The equipment uses food grade environmental protection 316 stainless steel filter as the medium to remove suspended solids, suspended solids in water (≥50 μm) separation. When the water containing suspended particles enters the drum through the inlet, the suspended particles are intercepted by the filter screen, and the water filtered by the filter screen flows into the next treatment process or pool through the outlet.
1. The microfilter should be placed in a stable place; 2. The micro filter can be in the pipeline, but also by the water tower or pump water supply (in and out of the water pipe valve control), before and after the valve should be installed to adjust the water level; 3. When the sewage outlet of the collection tank is connected to the sewage pipe, there should be a certain high level difference to ensure that the cleaned dirt can be discharged in time; 4. After the box outlet is connected with the pipe, there should be a certain high level difference to ensure that the filtered water has a certain velocity in the pipe; 5. Check whether the inlet of the cleaning pump is soaked in water to ensure that the pump can absorb water and avoid idling without water; 6. Capacitor connection: the motor has three black, white and red output power lines (black is the zero line), and the capacitor has two black output lines. Connect the two black power lines of the capacitor to the red and white lines of the motor (optional exchange), and then connect the external zero line to the black line of the motor, and connect the live line to one of the red or white lines of the motor (under normal circumstances, it is connected to the white line). 7. Rotation direction of the drum: when facing the water outlet of the micro-filter, namely the installation of the motor and gear panel, the rotation direction of the drum should be clockwise. If it is found that the roller direction is counterclockwise after connecting to the test machine, please switch the red or white wires connected to the motor in (Step 6) to adjust the steering of the motor.


