Audited Supplier
JB7132
7085-85-0
Mixture
230-391-5
Structural Adhesive
Paste
Construction
Silicone
Room Curing
Silicone
Weatherability
Organic Material
Black
Acetic
Fast Cure and Environmental
Cartridge
24
junbond
Carton
300ml
China
3506100010
Product Description
Product Feature:
1. It is one-component, moisture curing acetic silicone sealant
2. Easy to apply Excellent elasticity Fast curing
3. Excellent adhesion to most common building materials
4. Outstanding weatherproofing capability
5. Acetic Window & Door Silicone Sealant
Main Application:
1. General indoor glass cabinet installation
2. Indoor door and window wardrobe installation
3. Indoor glass joint sealing
4. Kitchen and bathroom sealing
5. Ceiling bonding and sealing
6. Other uses tested and applicable
How to use:
1. Before construction, a test of the adhesion of the sealant to the substrate should be carried out to confirm the suitability
of the product.
2. The substrate should be thoroughly cleaned with solvent or suitable cleaning agent, kept dry and glued within 30 minutes
after cleaning.
3. When gluing, ensure that the gap is completely filled, so that the gluing layer is dense and in close contact with the
surface of the substrate, and the gluing gap should be repaired within 5 minutes after gluing.
4. Suitable application temperature range 5°C to 40°C.
Warnings:
1. Use in a well-ventilated environment.
2. Use solvents in accordance with the appropriate safety regulations.
3. Keep the product out of the reach of children.
4. If uncured sealant melts your eyes, wash them immediately with water or seek medical attention.
Executive Standard: GB/T14683-2017
1. It is one-component, moisture curing acetic silicone sealant
2. Easy to apply Excellent elasticity Fast curing
3. Excellent adhesion to most common building materials
4. Outstanding weatherproofing capability
5. Acetic Window & Door Silicone Sealant
Main Application:
1. General indoor glass cabinet installation
2. Indoor door and window wardrobe installation
3. Indoor glass joint sealing
4. Kitchen and bathroom sealing
5. Ceiling bonding and sealing
6. Other uses tested and applicable
How to use:
1. Before construction, a test of the adhesion of the sealant to the substrate should be carried out to confirm the suitability
of the product.
2. The substrate should be thoroughly cleaned with solvent or suitable cleaning agent, kept dry and glued within 30 minutes
after cleaning.
3. When gluing, ensure that the gap is completely filled, so that the gluing layer is dense and in close contact with the
surface of the substrate, and the gluing gap should be repaired within 5 minutes after gluing.
4. Suitable application temperature range 5°C to 40°C.
Warnings:
1. Use in a well-ventilated environment.
2. Use solvents in accordance with the appropriate safety regulations.
3. Keep the product out of the reach of children.
4. If uncured sealant melts your eyes, wash them immediately with water or seek medical attention.
Executive Standard: GB/T14683-2017
No | Test Item | Unit | Actual results | |
1 | Appearance | - | Smooth, no air bubbles, no lumps | |
2 | Tack free time(at what % humidity) | min | 4 | |
3 | Slump | Vertical | mm | 0 |
Horizontal | mm | Not deformed | ||
4 | Extrusion | ml/min | 3928 | |
5 | Shore A hardness /72h | 12- | 12 | |
6 | Shrinkage | % | / | |
7 | Effect of heat aging on | - | ||
- Weight loss | % | 43.0% | ||
- Cracking | - | No | ||
- Chalking | - | No | ||
8 | Tensile adhesion | Mpa | ||
- Standard condition | 0.4 | |||
- Immersion in water | / | |||
- Dry at 100°C | / | |||
9 | Elongation at break | % | 253 | |
10 | Specific gravity | g/cm3 | 0.95 | |
11 | Completely dry | hours | 20 | |
12 | Temperature Resistence | °C | -50ºC~150ºC | |
13 | Application Temperature | °C | 4ºC~40ºC | |
14 | Color | Transparent,Black,White,custmize color | ||
