Audited Supplier
JB-500
9009-54-5
C6h7no2
230-391-5
Structural Adhesive
Solvent
Automobile, Construction, Woodworking, Footwear & Leather
Silicone
Room Curing
107
Weatherability
Oil
Organic Material
White
Jb-500
12 Months
Yes
300ml
590ml
Free
Sealing and Bonding
Caulk
OEM
One Stop
Top 1 Manufacturer
4 Time Quality Control
Weatherproof, UV Resistant
Smooth, No Bubble
Easy to Apply
Junbond
24pieces/Carton
590ml
China
3506100010
Product Description
Environment Friendly Sealant Adhesive Acrylic Latex Caulk Acrylic Caulk with Silicone
Characteristics:
This product is a general purpose, water based paintable Acrylic sealant for caulking, sealing
and decoration uses in waterproofing, gap filling, wood frame joints, doors & windows sash, drywall, plaster, marble, tile & brick
works, painters sealant for interior works.
Main Purpose:
For caulking, sealing and decoration uses in waterproofing, gap filing, wood frame joints, doors & windows sash, drywall,
plaster,marble, tile & brick works, painters sealant for interior works.
Characteristics:This product is a general purpose, water based paintable Acrylic sealant for caulking, sealing
and decoration uses in waterproofing, gap filling, wood frame joints, doors & windows sash, drywall, plaster, marble, tile & brick
works, painters sealant for interior works.
Main Purpose:
For caulking, sealing and decoration uses in waterproofing, gap filing, wood frame joints, doors & windows sash, drywall,
plaster,marble, tile & brick works, painters sealant for interior works.
Serial No. | Test item | Unit | Requested standard | Test result | Test result |
1 | Appearance | No caked appearance, no separation, uniform paste | Qualified | Qualified | |
2 | Density | g/cm³ | +/- 0.1 | 1.6 | Qualified |
3 | Sag | mm | ≤3 | 0 | Qualified |
4 | surface drying time | h | ≤1 | 0.4 | Qualified |
5 | Extrusion property | ml/min | ≥100 | 348 | Qualified |
6 | Elastic recovery rate | % | ≥40 | 45 | Qualified |
7 | Fixed adhesion | no damage | no damage | Qualified | |
8 | Deposition and adhesion after immersion | no damage | no damage | Qualified | |
9 | adhesion after cold drawing and after hot pressing | no damage | no damage | Qualified | |
10 | Low temperature flexibility | No cracking, delamination and bond damage at -20ºC | No cracking, delamination and bond damage | Qualified | |
11 | Volume change rate | ≤30 | 29 | Qualified |
