Audited Supplier
Becoat 9060
68909-20-6
230-391-5
Conformal Coating
Beginor
30cc/PCS; 310 Ml/Tube; 1L/Plastic Bottle
China
3214109000
Product Description
Product Description
Becoat 9060 is a low viscosity one-component silicone protective coating that is environmentally friendly, non-toxic and easy to use. After curing, it forms an optical transparent film with excellent high and low temperature resistance, weather resistance, electrical insulation and excellent waterproof, shock and absorption expansion and contraction, corona resistance and leakage resistance.
It can enhance the moisture-proof and anti-fouling ability of electronic circuits and components, prevent the solder joints and conductors from being eroded, and also shield and eliminate electromagnetic interference and prevent short-circuit of the circuit, and improve the insulation performance of the circuit board.In addition, the protective film of the coating also contributes to the abrasion resistance and solvent resistance of the wires and components, and releases the pressure caused by periodic changes in temperature.
Performance | 9060 | 9061 |
Appearance | Transparent | Transparent |
Density (g/cm3, 25 ºC) | 0.99 ± 0.03 | 0.99 ± 0.03 |
Viscosity (mpa.s) | 600 | 1000 |
Dry time (min, 25 ° C) | 8~12 | 15~20 |
Initial curing (hr, 25 ° C) 0.1mm | 0.5 | 1 |
All dry time (hr, 25 ºC) | 72 | 72 |
Hardness (Shore A) | 20±3 | 20±3 |
Tensile strength (MPa) | 0.3 | 0.3 |
Elongation at break (%) | 100 | 100 |
Using temperature range (ºC) | -60~280 | -60~280 |
Volume resistivity (Ω cm) | ≥1.0×1015 | ≥1.0×1015 |
Dielectric strength (kV/·mm) | 2.9 | 2.9 |
How to use
1) Clean the surface thoroughly, keep dry and loose debris.
2) For a small amount of spraying, manual spray gun can be used to spray automatically, and 100% of the coating can be directly used. The thickness of the primary coating is generally between 0.1-0.4mm. If you want to get a thicker coating, it is better to apply two thin layers, and it is required that the second layer can be applied only after the first layer is completely dried.
3) After construction, it can be placed on the support and solidified at room temperature. Heating can speed up the curing rate, and the recommended heating temperature is 50 ºC - 60 ºC 5-10 mins.
4) To repair the coated components, the components can be removed only by contacting the soldering iron directly with the coating. Then install new components and parts, and then clean the area with brush or solvent; or clean the area with solvent; after drying, paint again.
2) For a small amount of spraying, manual spray gun can be used to spray automatically, and 100% of the coating can be directly used. The thickness of the primary coating is generally between 0.1-0.4mm. If you want to get a thicker coating, it is better to apply two thin layers, and it is required that the second layer can be applied only after the first layer is completely dried.
3) After construction, it can be placed on the support and solidified at room temperature. Heating can speed up the curing rate, and the recommended heating temperature is 50 ºC - 60 ºC 5-10 mins.
4) To repair the coated components, the components can be removed only by contacting the soldering iron directly with the coating. Then install new components and parts, and then clean the area with brush or solvent; or clean the area with solvent; after drying, paint again.
For more information, please contact us
Shanghai Siway Building Materials Co., Litimed., our comapany is a professional silicone sealant manufacturer. We have a varity of silicone sealants, main products are Structural silicone sealant, Neutral silicone sealant, weatherproof silicone sealant, Stone silicone sealant and others. The products own a good repution in home and abroad, especially in Europe, North America, the Middle East and other regions.We are the large group of sealant production, rely on the raw material suppling base to produce the professional sealants. More production lines and Quanlity stabel. The capacity of production is 10 million tons per year of silicone sealants.Other different sealants also very large quantity,can satisfy big projects request.
FAQ
Q: How can i get the price?
A: We usually quote within 24 hours after we get your inquiry(Except weekend and holidays). If you are very urgent to get the price, please email us or contact us in other ways so that we can offer you a quote.
Q: Can I buy samples placing orders?
A: Yes.Please feel free to contact us. The sample is free, you only need to pay the shipping cost. When you place an order again, we will refund the shipping cost of the sample order for you.
Q: Can I buy samples placing orders?
A: Yes.Please feel free to contact us. The sample is free, you only need to pay the shipping cost. When you place an order again, we will refund the shipping cost of the sample order for you.
Q: What is your lead time?
A: It depends on the order quantity and the season you place the order. Usually we can ship within 7-15 days for small quantity, and about 30 days for large quantity.
Q: You a manufacturer or trader? Do you provide OEM/ODM services?
A: We are a manufacturer of sealants and water-based paints. We have three production bases in China, and have fully automatic production lines, which can meet different order requirements. We provide OEM and ODM services, welcome to contact us.
Q: What is your payment term?
A: T/T, Western Union, L/C and Paypal. This is negotiable.
Q: What is the shipping method?
A: It could be shipped by sea, by air or by express(EMS, UPS, DHL, TNT, FEDEX and ect).Please confirm with us before placing orders.
