Audited Supplier
The principle of ultrasound surgery is to use ultrasound energy on human tissue mechanical, cavitation and other effects, so that the diseased tissue fragmentation, emulsification, so as to achieve the purpose of treatment.
Ultrasonic knife function:
The working frequency of 55.5KH cutter head can deal with both parenchymal tissue and connective tissue, cutting larger pieces of tissue, both for laparoscopic surgery and open surgery, configuring different types of cutter heads to meet the needs of different surgeries.
Our company provides ultrasonic knife with high performance and high stability, the transmission frequency is 55,5000HZ mechanical vibration, which can cut and stop bleeding at the same time. The transmission amplitude is 60-100 micron vibration, which ensures the best cutting and coagulation effect.
| Part List | |||||||||
| Part No. | Part Name | Material | Type(cm) | Key size (mm) | |||||
| Length | Front D1 | Rear D2 | Pin hole D3 | back-end interface C | Note | ||||
| 17102101 | Ultrasonic Knife Head Center Pole | titanium | 14 | 183±5 | Φ2.15 | Φ4.45 | Φ1.8 | 4-40 UNC-3B | Compatible with Johnson Richter Mainframe |
| 17102111 | 23 | 274±5 | Φ2.15 | Φ4.4 | Φ1.8 | 4-40 UNC-3B | |||
| 17102121 | 36 | 403±5 | Φ2.15 | Φ4.45 | Φ1.8 | 4-40 UNC-3B | |||
| 17102131 | 45 | 494±5 | Φ2.15 | Φ4.4 | Φ1.8 | 4-40 UNC-3B | |||
| Part List | ||||||||
| Part No. | Part Name | Material | Type | Key size (mm) | Note | |||
| Outer casing connection D1 | Internal Casing Interface D2 | Clamping angle A1 | Negative Clamp Angle A2 | |||||
| 17102141 | Ultrasonic Knife Head Tube Assembly | sus304 | 14 | Φ7.75±0.10 | Φ7.0±0.10 | 40°~45° | -8°~-12° | Compatible with Johnson Richter Mainframe |
| 17102151 | 23 | Φ7.75±0.10 | Φ7.0±0.10 | 40°~45° | -8°~-12° | |||
| 17102161 | 36 | Φ7.75±0.10 | Φ7.0±0.10 | 40°~45° | -8°~-12° | |||
| 17102171 | 45 | Φ7.75±0.10 | Φ7.0±0.10 | 40°~45° | -8°~-12° | |||
FAQAre you a trading company or a factory?
A: We are a factory, we are the factory with our own production line and inspection and control process with ISO9001 and ISO13485 quality management system.
Q: What are your technical advantages?
A: We always focused on medical device components, mainly on wire, cable, tube, needle and standard products etc. Also we have completely manufacture machines and process basing on medical requirements. Our team have had strong experience on the design and manufacturer of medical components
Q: Do you need drawings for quotation and production?
A: Yes, all of products to be customized. We need either drawings or samples. 3D data will be better. We need your all requirements with your products as our input.
If only sample, our engineer team will make out a technical drawing for your confirmation according to your request before mass to production.
Q: What are your terms of payment?
A: For new order, we can accept 50% T/T in advance, balance before shipment. And we can communicate more payment term with you by the future order.
