Audited Supplier
continuous fiber reinforced composites
ISO
Waterproof, Light and Tough, Environmental, Low Cost, Long Life
Impreganation
E-Glass
Resin: PP, PE, PA, Nylon
0.17mm-0.4mm
Glass Fiber, Aramid Fiber, Carbon Fiber
Polypropylene(PP), Polyethylene(PE), Nylon(PA)
0-1300mm
250-650GSM
Bending, Decoiling, Moulding, Welding, Punching
Natural, Black, Green, Grey, Customized
Strong Strength, Lightweight, Recyclable
3000m
Glass Fiber, Carbon Fiber
Carbon Black, Anti-Aging, Antioxidant
Vehicle Parts, Sport Equipment, Sandwich Panels
Melt Impregnation
PP, PE, PA6, PA1012, PETG, etc
0-30% by Weight
AB Composite
Ud Tapes Packed as Per Request, Pallet, Plywood
ud tape size as per request 1300mmX3000m
Qingdao, China
3921902000
Product Description
Fiberglass Reinforced Plastic Tape, Fiberglass Tape For Truck Body, Thermoplastic Casting Tape
In short, what we could provide:
| 1 | Continuous Fiberglass Reinforced Thermoplastic products, including --Unidirectional tapes --laminate --sandwich panel etc. |
| 2 | Machinery line, which could produce the above products |
| 3 | Factory construction guidance, from 0 to a functioning factory. |
On the right is our factory.
We belong to a well-known listed company, relying on the parent company's rich talent reserves and strong capital, our company has rapidly developed into an industry leader. At present, our products are exported to the United States, the Middle East, and other places, mainly used in reinforcing oil&gas pipes and construction, vans.
We belong to a well-known listed company, relying on the parent company's rich talent reserves and strong capital, our company has rapidly developed into an industry leader. At present, our products are exported to the United States, the Middle East, and other places, mainly used in reinforcing oil&gas pipes and construction, vans.
Specification for Continuous glass fiber (GF) reinforced thermoplastic tape
| Fiber Types | glass fiber, aramid fiber, carbon fiber |
| Resin Types | Polypropylene (PP), Polyethylene (PE), Nylon (PA) |
| Tape Thickness | 0.15-0.4MM |
| Tape Areal Weight | 250gsm-1300 gsm |
| Tape Width | 0-650mm |
| Color | natural and black, other colors can be customized |
| Glass Fiber content | 0%-70% by weight |
| Application | Thermoplastic reinforced composite pipe, automotive parts, safety protection, wrapping cylinder, etc |
CFRT-UD Unidirectional belt
CFRT unidirectional tape is a single-layered, fiber-reinforced thermoplastic composite sheet in which the continuous fibers are unrolled and laid, and impregnated with a thermoplastic resin. Fibers characterize it arranged parallel to each other (0° direction) without interlacing.
Product width:
300mm/600mm/1200mm, can be customized.
Main applications of the fiberglass reinforced tape:
automotive interior and exterior trims, thermoplastic winding pipes, sports leisure, home building materials, transportation logistics, and aerospace.
Our fiberglass ud tapes production line
The data sheet of Thermoplastic Unidirectional Tape
Physical Properties
| Properties | Units | 60%GF+PP | 60%GF+DHPE | 55%GF+PA6 |
| Density | g/cm3 | 1.5 | 1.55 | 1.55 |
| Glass fiber content | % | 60 | 60 | 55 |
| Thickness | MM | 0.26 | 0.32 | 0.32 |
| Areal Weight | g/m2 | 390 | 500 | 500 |
| Tensile Strength 0° | MPa | 950 | 900 | 700 |
| Tensile Modulus 0° | Gpa | 28 | 30 | 27 |
Below is the extra wide tape test report;
We have special quality inspection personnel who work in the workshop. The job requirement is to inspect each fiberglass roll.
The following is the quality inspection work content.
| Color | natural | width | 1280mm | test date | 2021.12.29 | ||||||||||||
| Test Report | |||||||||||||||||
| test point | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | |||||
| Thickness(mm) | 0.337 | 0.332 | 0.328 | 0.333 | 0.335 | 0.333 | 0.332 | 0.333 | 0.334 | 0.310 | 0.295 | 0.286 | |||||
| Fiber Content(%) | 58.2% | 57.6% | 59.0% | 57.3% | 56.8% | 58.5% | 58.0% | 54.5% | 53.7% | 57.2% | 61.6% | 62% | |||||
| Tensile strength(MPa) | 686 | 729 | 699 | 542 | 646 | 675 | 712 | 638 | 628 | 632 | 742 | 643 | |||||
| Tensile modulus(GPa) | 25.1 | 25.5 | 25.8 | 25.9 | 26.4 | 28.1 | 28.9 | 26.8 | 25.1 | 25.9 | 29.4 | 27.8 | |||||
Remark:
From the zero point side (remove the edge 20mm), every 10cm is an interval, and 1 point is taken in the interval, in order of 1-12;
Our Workshop
Our warehouse
Why us?
Good fiber dispersion:
The glass fiber is dispersed individually in the resin, which overcomes the problem of thermoplastic fiber dispersion.
Customized production:
using the melting process to meet different special performance requirements.
Mass production:
In mass production, the production cost is relatively low, and the quality is stable and reliable.
Thermoplastic ud tapes Workshop Overview
1. What's your MOQ?
1*20GP.
2. Is it possible to buy one sample?
Sure, but the sample charge and shipping cost should be paid by customers. The sample will be sent out within 10 days. Customized samples need more time.
3. What are your payment terms?
(1) 30% T/T as deposit and 30% balance before shipment.
(2) L/C at sight.
(3) To be discussed.
4. Are you a manufacturer or trade company?
We are one of the professional fiberglass tape manufacturers in China.
