Audited Supplier
Organic Silicone
Industrial
ISO, CE
Acetic
Cartridge
Carton
ISO9001 / Ios/Ts 16949/2009
Available
junbond
24
310ml 400ml 600ml
China
Product Description
Product Feature:
1. It is one-component, moisture curing acetic silicone sealant
2. Easy to apply Excellent elasticity Fast curing
3. Excellent adhesion to most common building materials
4. Outstanding weatherproofing capability
5. Acetic Window & Door Silicone Sealant
Main Application:
1. General indoor glass cabinet installation
2. Indoor door and window wardrobe installation
3. Indoor glass joint sealing
4. Kitchen and bathroom sealing
5. Ceiling bonding and sealing
6. Other uses tested and applicable
How to use:
1. Before construction, a test of the adhesion of the sealant to the substrate should be carried out to confirm the suitability
of the product.
2. The substrate should be thoroughly cleaned with solvent or suitable cleaning agent, kept dry and glued within 30 minutes
after cleaning.
3. When gluing, ensure that the gap is completely filled, so that the gluing layer is dense and in close contact with the
surface of the substrate, and the gluing gap should be repaired within 5 minutes after gluing.
4. Suitable application temperature range 5°C to 40°C.
Warnings:
1. Use in a well-ventilated environment.
2. Use solvents in accordance with the appropriate safety regulations.
3. Keep the product out of the reach of children.
4. If uncured sealant melts your eyes, wash them immediately with water or seek medical attention.
Executive Standard: GB/T14683-2017
1. It is one-component, moisture curing acetic silicone sealant
2. Easy to apply Excellent elasticity Fast curing
3. Excellent adhesion to most common building materials
4. Outstanding weatherproofing capability
5. Acetic Window & Door Silicone Sealant
Main Application:
1. General indoor glass cabinet installation
2. Indoor door and window wardrobe installation
3. Indoor glass joint sealing
4. Kitchen and bathroom sealing
5. Ceiling bonding and sealing
6. Other uses tested and applicable
How to use:
1. Before construction, a test of the adhesion of the sealant to the substrate should be carried out to confirm the suitability
of the product.
2. The substrate should be thoroughly cleaned with solvent or suitable cleaning agent, kept dry and glued within 30 minutes
after cleaning.
3. When gluing, ensure that the gap is completely filled, so that the gluing layer is dense and in close contact with the
surface of the substrate, and the gluing gap should be repaired within 5 minutes after gluing.
4. Suitable application temperature range 5°C to 40°C.
Warnings:
1. Use in a well-ventilated environment.
2. Use solvents in accordance with the appropriate safety regulations.
3. Keep the product out of the reach of children.
4. If uncured sealant melts your eyes, wash them immediately with water or seek medical attention.
Executive Standard: GB/T14683-2017
No | Test Item | Unit | Actual results | |
1 | Appearance | - | Smooth, no air bubbles, no lumps | |
2 | Tack free time(at what % humidity) | min | 4 | |
3 | Slump | Vertical | mm | 0 |
Horizontal | mm | Not deformed | ||
4 | Extrusion | ml/min | 3928 | |
5 | Shore A hardness /72h | 12- | 12 | |
6 | Shrinkage | % | / | |
7 | Effect of heat aging on | - | ||
- Weight loss | % | 43.0% | ||
- Cracking | - | No | ||
- Chalking | - | No | ||
8 | Tensile adhesion | Mpa | ||
- Standard condition | 0.4 | |||
- Immersion in water | / | |||
- Dry at 100°C | / | |||
9 | Elongation at break | % | 253 | |
10 | Specific gravity | g/cm3 | 0.95 | |
11 | Completely dry | hours | 20 | |
12 | Temperature Resistance | °C | -50ºC~150ºC | |
13 | Application Temperature | °C | 4ºC~40ºC | |
14 | Color | Transparent,Black,White,customize color | ||
