Audited Supplier
Typical Values
PROPERTY | TEST METHOD | UNIT | TYPICAL VALUE |
Thickness | DIN 53370 | micron | 25 |
Surface Tension | ASTM D 2578 | mN/m | 40 |
Gloss (45°) | ASTM D 2457 | % | 71 |
Heat Shrinkage (MD/TD) | BMS TT 0.2 (150ºC, 30min) | % | 1.2 / 0.5 |
Coefficient of Friction | DIN 53375-A | ---- | 0.5 / 0.43 |
Tensile Strength (MD/TD) | ASTM D 882 | MPa | 171 / 242 |
Elongation at break (MD/TD) | ASTM D 882 | % | 171 / 113 |
Remarks: The above values of the properties obtained in our laboratory test. These values are for informative purpose and not in guarantee or warranty in any specific conditions. Users are advised to conduct their own testing to determine product suitability to use.
Main Characteristics
* Excellent metallized glossy surface
* High whiteness
* Low light transmittance
* High barrier properties
* Good dimensional stability
* Superior UV ink adhesion to achieve good printing performance
* Suitable for UV ink printing and barcode printing
Metallized and Top Coated White PET Film, is also known as Aluminized White Glossy Polyester Film. This film is manufactured of special raw materials by complex process. It's made with white glossy PET film, and then aluminized and chemical coating. And also, the surface is corona treated, and it has superior ink adhesion after top coating.
Within a variery of packaging and industrial applications, white PET film offers high whiteness and low transparency. It has its own outstanding properties of high merchanical strength, heat resistance, dimensional stability, low water adsorption, and resistant to grease, strong acids, oils and organic slovents. The white PET film is the ideal material for various printing applications, especially in the label and graphics industries.
Q1. What information should I let you know if I want to get a quotation?
A.Printing method
B.Size (thickness,width,length,release force,glue type)
C.Application
D.EXW, FOB or CIF(which port)
E.QTY
Q2. What is MOQ?
Generally, the minimum order is 1~10tons, depending on products.
Q3. Do you provide samples ?
Yes, we could offer the sample. If need, please contact us.
Q4.What about the lead time for mass production?
Generally, 15~30 days after received the deposit, depending on products.
