Audited Supplier
CA-70
Refractory Material
Castable
30-90
15-48
Customizable
1000-1700
jucos
Sea-Worthy Wooden Case
Castable
China
3816000000
Product Description
Castable refractories is product that is used in various part of furnace as Monolithic Refractories that added
hydraulic alumina cement to refractory aggregate, Our Company is producing suitable product to installation
and working condition through a quality control, this product which is minimizing alumina cement for using
various dispersants and ultra fine powder so it has excellent abrasion resistance, erosion resistance, spalling
resistance and chemical resistance . It widely used in part of various industrial furnace including incinerator,
nonferrous metal furnace etc.
Features Of Castable Refractory
- High refractoriness, High refractoriness under load
- High density, low porosity
- Good slag resistance and corrosion resistance
- High strength and wear resistance
- Good resistance to flake performance
- Good thermal shock stability
- Scouring resistance
- Good hot strength
Applications Of Castable Refractory
- mainly used in heat treatment furnace,heating furnace,soaking pit furnace,tundish slag dam weir,seconclary refining and
- the catalytic cracking unit etc key part of kiln furnace and thermal equipment.
Brand Properties | CA-190 | CA-185 | CA-180 | CA-175 | CA-170 | CA-165 | CA-160 | CA-155 | CA-150 | CA-140 | |
| Application Limit TempºC | 1,800 | 1,800 | 1,750 | 1,700 | 1,700 | 1,650 | 1,600 | 1,550 | 1,500 | 1,400 | |
| Bulk Density (g/cm3) | 2.90 | 2.85 | 2.80 | 2.60 | 2.50 | 2.30 | 2.15 | 2.10 | 2.10 | 2.00 | |
| Water Required for Casting (%) | 9-10 | 9-10 | 11-12 | 11-12 | 10-13 | 11-14 | 12-15 | 13-16 | 13-16 | 13-17 | |
| CCS/MOR (MPa) | 110ºCx24h | 55(9) | 30(6) | 30(6) | 30(6) | 25(5) | 25(5) | 20(4) | 20(4.5) | 25(5) | 20(5) |
| 1,200ºCx3h | 50(8) | 35(7) | 35(7) | 30(7) | 20(4) | 17(3.5) | 15(3.5) | 15(2.5) | 17(4) | 14(3) | |
| 1,400ºCx3h | 60(10) | 50(8) | 60(10) | 60(10) | 50(12) | 45(8) | 40(7) | 40(7) | 32(7.5) | - | |
| Permanent Linear Change (%) | 110ºCx24h | -0.03 | -0.03 | -0.06 | -0.06 | -0.06 | -0.06 | -0.06 | -0.06 | -0.06 | -0.06 |
| 1,200ºCx3h | -0.10 | -0.10 | -0.15 | -0.15 | -0.20 | -0.20 | -0.16 | -0.30 | -0.25 | -0.30 | |
| 1,400ºCx3h | -0.20 | -0.20 | -1.0 | -1.0 | -0.8 | -1.0 | -1.0 | -0.7 | - | - | |
| (W/m.k) Thermal conductivity | 400ºC | 0.95 | 0.95 | 0.92 | 0.92 | 0.80 | 0.72 | 0.68 | 0.68 | 0.65 | 0.60 |
| 1,000ºC | 1.1 | 1.05 | 1.02 | 1.02 | 0.90 | 0.85 | 0.88 | 0.80 | 0.76 | 0.71 | |
| (%) Chemical Analysis | Al2O3 | 92 | 88 | 82 | 75 | 62 | 55 | 50 | 47 | 44 | 35 |
| SiO2 | - | - | 10 | 10 | 29 | 40 | 43 | 45 | 50 | 55 | |
Q1 : How can you control your quality?
A1 : For each production processing, JUCOS have complete QC system for the chemicalcomposition and Physical properties. After production, all the goods will be tested, and
the quality certificate will be shipped along with goods.
Q2: Are you a manufacture or trader?
A2: We are truly a manufacturer, we not only can provide the high quality products with the
best price, but also can offer the best pre-sale service and after-service.
Q3 : Do you provide free samples?
A3 : Of course, free samples are available.
Q4 : What is your lead time?
A4 : It usually needs about 15- 20 days after receiving the PO.
Q5 : Can we visit your company?
A5 : Yes, for sure, you are welcome to visit JUCOS company and our products.
Also, we can talk more about the technique details if you need.
Q6 : What is the warranty of your products?
A6 : Our products have at least 1 year warranty,if any quality problems,
we will take responsibility of the cost of the shipment and the replacement.
Q7: What's the MOQ of trial order?
A7 : No limit, we can offer the best suggestions and solutions according to your condition.
Q8: Why choose us?
A8: We had been in this line for more than 25 years, we can not only provide you high
quality products with competitive price, but also we can supply good technique service
which can help you solve problems.
Q9 : What standards do you have?
A9 : Our products meet the standards, such as ASTM, ASME, AMS, DIN, JIS etc.
The third party testing is all available for us.
