Audited Supplier
usage:
The pulse valve is the compressed air"switch" of the dust spraying system of the pulse bag dust collector.Under the control of the output signal of the pulse injection controller,the filter bag row by row (chamber) to clear ash, so that the resistance of the dust collectoris kept within the set range,so as to ensure the processing capacity and dust collection efficiency of the dust collector.
Z type electromagnetic pulse valves is a right angle valve, with the 90 degree, angle between the inlet and outlet, which is suitable for the installation connection between the gas dome and the baghouse blow tube provide good air flow and dust clean pulses satisfying the requirements.
Y type electromagnetic pulse valves is a suble for the work occasions embedded valve is directly installed in the gas bag, with better flow chara-cteristics.As pressure losses drops, it will be suitable for the work occasion of loser pressure gas source.
T type electromagnetic pulse valves are the straight in valva, with the180 angle between the inlet and outlet, which is suitable for the installation connection between the inlet and gas dome, outlet and the blow tube toprovide good air flow and dust clean pulses satisfying the requirements.
Structure:
The pulse valve is composed of valve body,coil,diaphragm,pilot and spring,and the valve body is made of alloy aluminum
| Working Pressure: | 0.3Mpa~0.8Mpa |
| Working Medium: | Clean Air |
| Voltage: | DC24V AC110V AC220V |
| Current: | 0.8A 0.46A 0.23A |
| Used temperature: | -25ºC~+80ºC The relative humidity of the air does not exceed 85% |
| Membrane life: | 1 million times or 3 years |
