Audited Supplier
GPE 250-750 Ton Top Drive System TDS
Discover the advanced top drive technology of GPE Oil Machinery Co., Ltd. Our high-performance, reliable, and durable top drive system is designed for drilling rigs. With a range of 250 to 750 tons, our top drive system offers efficient and robust drilling solutions. Trust the expertise of the top drive manufacturer and supplier, GPE Oil Machinery Co., Ltd.
GPE Oil Machinery Co., Ltd - Triple Drilling System (TDS)
The Triple Drilling System (TDS) by GPE Oil Machinery Co., Ltd is a groundbreaking technological revolution in the petroleum equipment industry. Designed to replace traditional drilling methods such as Kelly and rotary table, TDS offers numerous advantages that enhance drilling efficiency and speed.
- Increased Drilling Speed: With TDS, drilling can be done with triples instead of singles, resulting in a significant reduction of two-thirds in the volume of work required for makeup and breakout. This not only saves time but also greatly increases drilling speed.
Experience the future of drilling technology with TDS by GPE Oil Machinery Co., Ltd. Say goodbye to outdated drilling methods and embrace the efficiency and speed offered by our revolutionary Triple Drilling System.
Technical specifications and parameters for Top Drive | |||
Specification | 250Ton | 350Ton | 500Ton |
Nominal drilling depth (5 1/2" drill pipe) | 4,000m(13,000ft) | 5,000m(16,000ft) | 7,000m(23,000ft) |
Rated load capacities | 2,250KN(250t)) | 3,150KN(350t) | 4,500KN(500t) |
Drilling torque (continuous, max.) | 32KN.m | 36KN.m | 54KN.m |
Rotary speed | 0 - 180rpm | 0 - 180rpm | 0 - 220rpm |
Rated power of AC induction motor | 315 KW x 1 | 350KW x 1 | 350KW x 2 |
Tilt angle of tilt arm ( max) | Forth 30" Back 55" | Forth 30" Back 55" | Forth 30" Back 55" |
Maximum torque of break out | 50KN.m | 65KN.m | 80KN.m |
Working pressure of hydraulic system | 16MPa | 16MPa | 16MPa |
Input voltage of driving cabinet | 600VAC | 600VAC | 600VAC |
Range of variable frequency | Rated 0 - 121Hz | Rated 0 - 121Hz | Rated 0 - 121Hz |
Shift gears range of motor | 0 - 2,400rpm | 0 - 2,400rpm | 0 - 2,400rpm |
Drill pipe range | 2 7/8" - 5 1/2" | 2 7/8" - 5 1/2" | 2 7/8" - 5 1/2" |
Alarm Temperature of motor |
| 220degree | 220degree |
Alarm Temperature of gear oil |
| 75degree | 75degree |
Alarm Temperature of hydraulic oil |
| 75degree | 75degree |
Transmission ratio |
| 12.8:1 | 10.4:1 |
Shift gears range of motor | 0 - 2,400rpm | 0 - 2,400rpm | 0 - 2,400rpm |
Drill pipe range | 2 7/8" - 5 1/2" | 2 7/8" - 5 1/2" | 2 7/8" - 5 1/2" |
Alarm Temperature of motor |
| 220degree | 220degree |
Alarm Temperature of gear oil |
| 75degree | 75degree |
Alarm Temperature of hydraulic oil |
| 75degree | 75degree |
Transmission ratio |
| 12.8:1 | 10.4:1 |
