Audited Supplier
GZR-750
380V
2 Years
380V
Automatic
CE, ISO
850 mm
550-800 mm
Max 200 N.M
0-220 R/Min
Stepless Frequency Control
600mm
50X90 Square
750mm
800 mm
500 Kg
Oil Transformer
2019
CFR, Fob
PLC
Siemens
Senerge
Standard Packing
winding machine
Zhejiang
Product Description
GZR-750 Transformer HV Coil Winding Machine
- Main Parameters
1.1 Center Height 850 mm
1.2 Center distance of spindle 550~800 mm
1.3 Mandrel torque Max 200 N.M
1.4 Working speed 0~220 r/min
1.5.Mode of speed control Stepless frequency control
1.6 Used winding parameters
Outside ≤600mm
Inside 50X90 square
Coil Length : ≤750mm
Rectangular coil diagonal length:≤800 mm
Winding weight:≤500 kg
1.7 Total power About 4.5 kw
1.8 Set the maximum number of turns on the counterMax. Set turns 9999.
1.9 Counting mode 5-digital display, can set total turns and set turns in 20 times, reverse counting available, no loosing data in the event of power-off.
1.10 Conductor specification enamelled wire: φ0.2mm~φ3mm
1.11 Coil shape round ,square
1.12 Automatic winding Adjust the min distance of wire in 0.01mm
1.13 Power supply 380v/50Hz
1.14 Color Customized
2 Layer insulation decoiler
2.1 Layer insulation installed shaft 2 sets
2.2 Layer insulation outside ≤φ400 mm
2.3 Layer insulation inside φ76 mm
2.4 Layer insulation coil width 200~800 mm
2.5 Decoiler expansion way inflatable
2.6 Decoiler tension ≤50 N.M pneumatic stepless adjustable
3 Automatic winding-rewinding rack
3.1 Mandrel torque Max 25 N.M
3.2 Working speed 65 r/min
3.3 Used winding parameters
Outside ≤350mm
Inside ≥27mm
Coil length : ≤350mm
3.4 Base moving distance 550mm
4 Electric system PLC Control
4.1 Counting Digit Four(0~999.9) Accuracy 0.1 turn
4.2 Operation interface colorful touch screen
3.Function
3.1 The machine adopts hard fabrics gear mechanical transmission system, high efficiency, low noise 60dB.
3.2 The motor with brake function, sensitive and reliable
3.3 Used on electrical frequency control of motor speed and braking is controlled by inverter, thus starting, braking and the slope can be preset to apply winding groove.
3.4 Frequency control of motor speed range, control of motor speed accurately,
stability;
3.5.With function of automatic winding .
3.6 Adopt servo motor and PLC control system, high-definition touch panel screen display and man-machine conversation, adopt imported ball screw transmission and linear guide rails meet the line accurately.
3.7 Set up dedicated line,Synchronize the ribbon cable and winding automatically
3.8 Wiring device is equipped with tension bridle function, adjustable tension, to meet the requirements of different wire gauge.
3.9 Winding former according to different wire gauge, convenient set automatic thread pitch. In the winding process, the possible error can be manual fine-tuning, ensure that the coil tightly.
3.10 Desktop control box placed in the above case, easy to use, display and clear
3.11 Equipped with a square shaft (90 x 50 mm) is a hollow shaft
4.Machine Delivery statue
Automatic HV winding machine 1 set
Automatic winding-rewinding device 1 set
Installed diagram with operation instruction(circuit/pneumatic diagram);certificate
