Audited Supplier
2. Crankshaft (Left)
3. Main gear (Left)
4. Gear (Middle)
5. Idle gear
6. Main gear (Right)
7. Crankshaft (Right)
H-Frame Double Crank Presses (Unitized Frame) STE-400
STE series is Straight Side Unitized Frame Double Crank(H-frame 2-point), this press are for general purpose stamping. Suitable for punching, forming, blanking, bending, drawing, and trimming. This type is generally used for progressive tool, robotic system and in die transfer applications.
It's have the shorter lead time and economic advantage when the application fits, compareing with the tie rod construction presses design(STF series:Trisection-type).
STE series presses are produced by Qiaosen machinery, which built to meet or exceed JIS Class 1 accuracy standards . Qiaosen adopt high strength steel frames and Quenching&Grinding Process for Slide-Guide,which can make the press machine have minimizing deflection and high accuracy and provide increased tool life.
Forged 42CrMo alloy material crankshaft ,precision-machined gears and other drive train components are designed for smooth power transmission, quiet operation and long life. STE series presses are wet clutch system,It has longer service life of the clutch system. Adopting "8-Points Slide Guiding" ,its makes the presses has the characteristics higher accuracy and stronger stability. The design of intermediate-gear increases the both spacing of 2sides main gears and the 2sides crankshafts, which can improve resistance to eccentric-load. Standard configuration "Re-Circulating Oil lubrication", which have better heat dissipation, faster speed, more energy efficient and more environmentally friendly.
Siemens main motor and siemens based control platform and user-friendly touch screen operation interface are standardized in all QIAOSEN's presses, it provides ease of operation and expandable capabilities. Easy to integration with other automation system. Other brands of control can be furnished upon request.
| Mode | Press capacity | Impact force location | slide strokes per minute | Slide stroke length | Max mold height | slide adjustment amount |
| Unit | Ton | mm | S.P.M | mm | mm | mm |
| S | 400 | 7 | 20~40 | 300 | 550 | 120 |
| H | 3 | 30~60 | 180 | 450 | ||
| Slide size | Bolster size | Slide opening | Main motor power | Air pressure | Press accuracy grade | |
| mm | mm | mm | KW*P | kg*cm² | Grade | |
| S | 2200*900 | 2500*1000 | 900*650 | 37*4 | 6 | JIS 1 |
| H |
| > | Hydraulic overload protection device | > | Air blowing device |
| > | Electric slider adjusting device | > | Mechanical shockproof feet |
| > | Variable frequency variable speed motor (adjustable speed) | > | Mis-feeding detection device reserved interface |
| > | Electronic cam device | > | Maintenance tools and toolbox |
| > | Digital die height indicator | > | Main motor reversing device |
| > | Slider and stamping tools balance device | > | Light Curtain (Safety Guarding) |
| > | Rotating cam controller | > | Wet Clutch |
| > | Crankshaft angle indicator | > | Electric grease lubrication device |
| > | Electromagnetic counter | > | Touch screen (pre-break, pre-load) |
| > | Air source connector | > | Mobile electric control cabinet and console |
| > | Second degree falling protecting device | > | LED die lighting |
| > | Forced Thin Re-Circulating Oil Lubrication System Device | > | 8-Points Slide Guiding |
| > | Customization Per Customer Requirement | > | Foot Switch |
| > | Die Cushion | > | Electric Automatic Grease Lubrication Device |
| > | Quick Die Change System | > | Dry Clutch |
| > | Slide Knock Out Device | > | Anti-Vibration Isolator |
| > | Turnkey System with Coil Feedline and Automation System | > | Tonnage Monitor |
with small deformation
its hardness could reach HRC45 degree or more.
Advantage: perfect wear resistance
all tooth surfaces are treated with medium frequency
Advantage: small wear, high accuracy,long service life
Alloy 42 CrMo Material
Advantage: 1.3 times Stronger than 45 steel
Japanese grade TM-3 sintered copper alloy
Advantage: less failure rate with sawtooth ball
Features:
1. Heavy one-piece steel frame,minimizing deflection,high accuracy.
2. Pneumatic wet clutch brake,longer service life.
3. 8-points slide guiding, stronger stability and resistance to eccentric-load. Adopting Quenching&Grinding Process for Slide-Guide,which can make the press 4. machine higher accuracy & low wear and provide increased tool life.
4. Forged 42CrMo alloy meaterial crankshaft, its strength is 1.3 times higher than that of #45 steel, and service life is longer.
5. Copper sleeve is made of tin phosphorus bronze ZQSn10-1, which has a strength 1.5 times higher than that of ordinary BC6 brass.
6. Highly sensitive hydraulic overload protection device,effectively protect the service life of the presses and tools.
7. Forced thin re-circulating oil lubrication device, energy-saving, environmentally friendly, equipped with automatic alarm function, with better smoothness and heat dissipation, and better lubrication effect.
8. Built to JIS Class I accuracy standard.
9. Optional Die Cushion.
> Training:
Qiaosen provide complete training for our aboard customers through Internet so that operators, supervisors and maintenance team could know well of operation and maintenance as well as simply trouble shootings.
> Maintenance:
Qiaosen in-house maintenance department are responsible for internet inspection and suggestion immediately. If the remote guidance couldn't solve the issue, we will arrange the professional engineers to the door for maintenance by paid service.
