Audited Supplier
H2 Gas Diaphragm Compressor for industry
10024-97-2
1year
Diaphragm Compressor
High Back Pressure Type
Low Noise
Not Mute
Oil-free
Electromagnetic
Stationary
Electric Motor
Stainless Steel
Diaphragm Compressor
Diaphragm Compressor
H2 Gas
V Z L D Type
DSW
Standard Seaworthy Packing
5-950nm3/h
China
8414809090
Product Description
V type diaphragm compressor for high purity gases
1 Equipment specifications and requirements
1.1 Location and site conditions:
(1) installation location: Indoor
(2) : dIIBT4,
Explosion protection requirements: Motor dIIBT4,
1.2: Common engineering criteria
(1) Cooling water
Pressure 3~5 Bar (G)
Water inlet temperature ≤ 30ºC
(2) Electric 3P/380 VAC/ 50HZ,
1.3 Drive method: Electric motor , Belt drive
1.4 Processing technology and parameter requirements
(1)Suction pressure: 7 bar (G)
(2) Discharge pressure: 160bar (G)
(3) Suction Capacity: 50Nm3/h
(4) Media: CH4 C2H4
(5) Suction temperature: ≤30 ºC
(6) Temperature of water inlet: ≤30 ºC
2 Technical Parameters
2.1 Main Technical Specifications
(1) Model: GL2-50/7-160
(2) Type
L-type, water-cooling,two-stage Compression
(3) Drive method Crank shaft and connecting rod
(4) Media : CH4 C2H4
(5)Suction Capacity: 50Nm3/h
(6) Suction pressure: 7 bar (G)
(7) Discharge pressure: 160bar(G)
(8) Suction temperature: ≤30 ºC
(9)Discharge temperature: ≤45 ºC
(10)Lube oil temperature: ≤70 ºC
(11) Crank shaft speed: 420r/min
(12) Piston stroke: 105 mm
(13) Shaft power: ≤9.5.kW
(14) Water-inlet temperature: ≤30 ºC
(15) Cooling water consumption 1200L/h
(16)Lube oil trademark: L-HM -68
L-HM-68# Chemical-Resistant Lube oil
(18) :Amount of the first oil: 25Kg
(19) Transmission method: strap transmission
2.2 Electromotor
(1)Model: YB3-160L-4
(2) Power: 15kW
(3) Electromotor speed: 1460r/min
(4) Supply voltage 380V/50Hz
(5) Defend exploding grade: dIIBT4
(6) Defend and insulation request: IP55/F
2.2.1 Electromotor
(1)Model: YB3-80L-4
(2) Power: 0.75kW
(3) Electromotor speed: 1400r/min
(4) Supply voltage 380V/50Hz
2.3 Compressor skid
(1) Dimensions: 1700×850×1150mm
(2) Weight: 1100 kg
3 Technical requirements
3.1 Materials in contact with the medium and compression
(1) Gas cover: 3Cr13
(2) Diaphragms: /00Cr15Ni5.
(3) Suction valve and Discharge valve:
Hoerbiger / Cozzani,baohua
(4) 304 stainless steel
Pipeline, Joint, Flange, Cooler, etc., 304stainless steel
3.2 Important accessory material
(1) Diaphragm head: 45
(2) Perforated plate: 45
(3) Piston pole: 40Cr
(4) Crankcase: HT200
(5) Cross-head: QT600-3
(6) Oil-pipeline 304 stainless steel
(7) Strap Anti static triangle belt
3.3 The request to Equipment
(1) Compressor,electromotor,assistant equipment,gauge and pipeline install on the underpan ;
(2) Supply Specialties tools,spare parts and document one set.
(3) PID;Affording the control principle drawing.
3.4 All of the compressor control
(1)Auto alarm for 1st stage diaphragm rupture
Auto alarm for 1st stage diaphragm rupture,the pressure is higher than 0.25MPa, compressor alarm shutdown,
(2) Auto alarm for 1st stage diaphragm rupture
Auto alarm for 2st stage diaphragm rupture,the pressure is higher than 0.25Mpa, compressor alarm shutdown,
4 High exhaust pressure protection
16.5 MPa,
Exhaust pressure is higher than 16.5mpa, compressor alarm
| type | inlet pressure MPa(G) | outlet pressure MPa(G) | flow rate Nm3/h | power kW | rotate speedr/min |
| 1G3V-40/13-I | normal pressure | 1.3 | 40 | 15 | 330 |
| 2G3V-40/13-150 | 1.3 | 15 | 40 | 15 | 400 |
| H-GV3-950/69-80 | 6.9 | 8.0 | 950 | 18.5 | 400 |
| H-GV3-60/2-74 | 0.2 | 7.4 | 60 | 22 | 400 |
| GV3-100/17-250 | 1.7 | 25 | 100 | 30 | 400 |
| GV3-200/140-300 | 14 | 30 | 200 | 30 | 400 |
| G2.5V-10/200 | normal pressure | 20 | 10 | 7.5 | 400 |
| G2.5V-10/1-160 | 0.1 | 16 | 10 | 11 | 400 |
| G2.5V-20/4-350 | 0.4 | 35 | 20 | 11 | 400 |
| G2.5V-20/4-160 | 0.4 | 16 | 20 | 11 | 400 |
| G2.5V-20/4-250 | 0.4 | 25 | 20 | 11 | 400 |
| CG2V-5/200 | normal pressure | 20 | 5.0 | 3.0 | 400 |
| G2V-10/13 | normal pressure | 1.3 | 10 | 3.0 | 400 |
| G2V-5/4-350 | 0.4 | 35 | 5.0 | 3.0 | 400 |
| G2V-8/2.5-160 | 0.25 | 16 | 8.0 | 5.5 | 400 |
| G2V-5/4-160 | 0.4 | 16 | 5.0 | 5.5 | 400 |
1 Equipment specifications and requirements
1.1 Location and site conditions:
(1) installation location: Indoor
(2) : dIIBT4,
Explosion protection requirements: Motor dIIBT4,
1.2: Common engineering criteria
(1) Cooling water
Pressure 3~5 Bar (G)
Water inlet temperature ≤ 30ºC
(2) Electric 3P/380 VAC/ 50HZ,
1.3 Drive method: Electric motor , Belt drive
1.4 Processing technology and parameter requirements
(1)Suction pressure: 7 bar (G)
(2) Discharge pressure: 160bar (G)
(3) Suction Capacity: 50Nm3/h
(4) Media: CH4 C2H4
(5) Suction temperature: ≤30 ºC
(6) Temperature of water inlet: ≤30 ºC
2 Technical Parameters
2.1 Main Technical Specifications
(1) Model: GL2-50/7-160
(2) Type
L-type, water-cooling,two-stage Compression
(3) Drive method Crank shaft and connecting rod
(4) Media : CH4 C2H4
(5)Suction Capacity: 50Nm3/h
(6) Suction pressure: 7 bar (G)
(7) Discharge pressure: 160bar(G)
(8) Suction temperature: ≤30 ºC
(9)Discharge temperature: ≤45 ºC
(10)Lube oil temperature: ≤70 ºC
(11) Crank shaft speed: 420r/min
(12) Piston stroke: 105 mm
(13) Shaft power: ≤9.5.kW
(14) Water-inlet temperature: ≤30 ºC
(15) Cooling water consumption 1200L/h
(16)Lube oil trademark: L-HM -68
L-HM-68# Chemical-Resistant Lube oil
(18) :Amount of the first oil: 25Kg
(19) Transmission method: strap transmission
2.2 Electromotor
(1)Model: YB3-160L-4
(2) Power: 15kW
(3) Electromotor speed: 1460r/min
(4) Supply voltage 380V/50Hz
(5) Defend exploding grade: dIIBT4
(6) Defend and insulation request: IP55/F
2.2.1 Electromotor
(1)Model: YB3-80L-4
(2) Power: 0.75kW
(3) Electromotor speed: 1400r/min
(4) Supply voltage 380V/50Hz
2.3 Compressor skid
(1) Dimensions: 1700×850×1150mm
(2) Weight: 1100 kg
3 Technical requirements
3.1 Materials in contact with the medium and compression
(1) Gas cover: 3Cr13
(2) Diaphragms: /00Cr15Ni5.
(3) Suction valve and Discharge valve:
Hoerbiger / Cozzani,baohua
(4) 304 stainless steel
Pipeline, Joint, Flange, Cooler, etc., 304stainless steel
3.2 Important accessory material
(1) Diaphragm head: 45
(2) Perforated plate: 45
(3) Piston pole: 40Cr
(4) Crankcase: HT200
(5) Cross-head: QT600-3
(6) Oil-pipeline 304 stainless steel
(7) Strap Anti static triangle belt
3.3 The request to Equipment
(1) Compressor,electromotor,assistant equipment,gauge and pipeline install on the underpan ;
(2) Supply Specialties tools,spare parts and document one set.
(3) PID;Affording the control principle drawing.
3.4 All of the compressor control
(1)Auto alarm for 1st stage diaphragm rupture
Auto alarm for 1st stage diaphragm rupture,the pressure is higher than 0.25MPa, compressor alarm shutdown,
(2) Auto alarm for 1st stage diaphragm rupture
Auto alarm for 2st stage diaphragm rupture,the pressure is higher than 0.25Mpa, compressor alarm shutdown,
4 High exhaust pressure protection
16.5 MPa,
Exhaust pressure is higher than 16.5mpa, compressor alarm
