Audited Supplier
HWM11
Microwave Sensor Switch
Capacitive
4 wire or M12x1 4P
Standard
CE
24V
relay, PNP, NPN
thread
-40~110 centi degree
-0.1~10MPa
PEEK SS304 or 316L
Ra< 0.8 μm
SS304 , SS316L
±1mm
DC≥1.5
0.2s
0s by default
8mA (typical); 50mA (maximum)
HIGHJOIN
Carton
Jiangsu, China
9028209000
Product Description
The microwave level switch determines the capacitance value at the end of the sensor and the dielectric constant value of the medium through a high-frequency electric field. Since the dielectric constant value of air is different from that of the medium, two states can be identified: covered and uncovered. Under normal circumstances, the indicator light is off to indicate uncovered, and the indicator light is always on to indicate covered, and the switch is switched.
This product has the characteristics of compact structure, strong anti-hanging performance, good stability, and wide application of media.
* for other types, please consult the sales.
1. Q: Are you manufacturer or trading company?
A: We are manufacturer which focuses on sensor for 10 years.
2. Q: What's your quality control system?
A: MC, ISO9001, CE Certificated.
3. Q: What is the warranty of your products?
A: Our warranty time is 18 months after shipment.
This product has the characteristics of compact structure, strong anti-hanging performance, good stability, and wide application of media.
- Not affected by foam, can detect foam, and can also penetrate foam to detect liquid under the foam, stable detection.
- Can use the handheld operator to set the alarm threshold on site and view the measured value
- Can effectively detect adhesive conductive slurry, pure water, metal powder, plastic powder, ultra-fine powder, etc.
| Measurement principle | sweep frequency |
| Measurement hysteresis | ±1mm |
| Medium characteristics | DC≥1.5 |
| Response time | 0.2s |
| Damping time | 0~5s(Configurable) |
| Repeatability | ±2mm |
| Power supply | 12~30VDC |
| Start-up time | <1s |
| Supply current (no load) | 8mA (typical) 50mA (maximum) |
| Wetted material | PEEK SS304 or 316L |
| Wetted surface roughness | Ra< 0.8 μm |
| Process connection | G1/2 male (by default) |
| Electronical connection | M12 4-core, 4x0.5mm cable outlet |
| Output signal | NPN /PNP 1.5 ±0.5V ,Rload=10k Relay SPST |
| Reverse polarity protection | Yes |
| Dielectric strength | 500VAC |
| Ambient temperature | Cable lead type: -25~70 ºC M12 connector type: -40~85 ºC |
| Working temperature | -40°C~+115°C |
| Typical type |
|
| Reverse installation type |
|
| Type | |||||||
| HWM11 | Microwave level switch | ||||||
| Code | Output Signal | ||||||
| B9 | Relay | ||||||
| B10 | NPN | ||||||
| B11 | PNP | ||||||
| Code | Housing Material | ||||||
| S4 | SS304 | ||||||
| S6 | SS316L | ||||||
| Code | Process Connection | ||||||
| G12 | G1/2 male | ||||||
| Code | Electrical Connection | ||||||
| C2 | Cable outlet | ||||||
| C5 | M12x1 4 pin | ||||||
| Code | Sealing ring | ||||||
| 0 | NA | ||||||
| FK | FKM | ||||||
| EP | EPDM | ||||||
| NB | NBR | ||||||
| Code | Factory setting | ||||||
| 0 | Low dielectric constant medium setting | ||||||
| 1 | Water-based medium setting | ||||||
| 2 | Conductive slurry setting | ||||||
| 3 | User-specific | ||||||
| eg:HWM11 | B10 | S4 | G12 | C5 | NB | 2 | |
1. Q: Are you manufacturer or trading company?
A: We are manufacturer which focuses on sensor for 10 years.
2. Q: What's your quality control system?
A: MC, ISO9001, CE Certificated.
3. Q: What is the warranty of your products?
A: Our warranty time is 18 months after shipment.
4. Q: What is lead time of your product?
A: Normally, our factory lead time is within 10~15 working days for products without customization. You can also check lead time detail with our sales depending on different items.5. Q: Do you provide customized products?
A: Yes, we can laser mark your logo on products; OEM and ODM customization are welcomed.6. Q: What is your MOQ?
A: We have no MOQ limit, small quantity order is acceptable.7. Q: What's the transport?
A: Express such as DHL, FedEx, TNT, UPS for freight prepaid; and we can also use your own courier account to do the freight collect. For more goods we can arrange by air or by Sea.8. Q: What is your terms of payment ?
A: We could accept T/T, Paypal, WU.
A: We could accept T/T, Paypal, WU.
