Audited Supplier
HPM131 Air Pressure Transmitter is specially designed for measuring small air pressure. It is very convenient for measuring liquid level by air-gathering non-contact method. This product adopts imported pressure transmitter as signal measuring component and is processed though temperature compensation. The signal modulation circuit within stainless steel shell can transform the signal of transmitter to standard current signal output. It is delicate and easy to install, which can be used in narrow confines and hostile environment for a long time. This product can be widely used in industrial process control, the liquid level measurement for open vessels and other occasions.
·Suitable to measure air pressure for clean, dry and non-corrosive air
·Available to measure liquid level by air-gathering non-contact method
·With polarity reversal protection ,overcurrent and overvoltage protection, meet EMI protection requirements
·Delicate structure, easy installation
·Strong overloaded capacity, at least 4 times full range overloaded, maximum up to 10 times
·Waterproof and ventilated design
| Measuring Medium | Clean and dry gas compatibles with 304 or 316L stainless steel |
| Pressure Range | 0~10,20,30,40,50kPa |
| Overload | 75kPa(0~10kPa), 200kPa(0~20…50kPa) |
| Pressure Type | Gauge |
| Accuracy | ±1%FS |
| Long-term Stability | ≤1%FS/year |
| Temperature Coefficient | ±1.0%FS(0~10kPa), ±2.0%FS(0~20…50kPa), Reference 25ºC |
| Operating Temperature | 0~60ºC |
| Storage Temperature | -20~80ºC |
| Supply Voltage | 24VDC(10~30V) |
| Output Signal | 4~20mADC |
| Output Mode | Two-wire |
| Insulation Resistance | 100MΩ,500VDC |
| Load Resistance | ≤(U-10)/0.02Ω |
| Ingress Protection of Shell | IP65 |
| Electrical Connection | dedicated gas-guide with shield cable 1.5 meters |
| Shell | Stainless Steel 1Cr18Ni9Ti |
| Weight | 150g |
| Item NO. | Type | |||||||
| HPM131 | Pressure Transmitter | |||||||
| Pressure Range | Measuring Range | |||||||
| (0~X)kPa | Electrical Connection | |||||||
| Code | Output Signal | |||||||
| B1 | 4~20mA | |||||||
| Code | Thread Spec | |||||||
| P3 | G1/4 | |||||||
| Code | Electrical Connection | |||||||
| C2 | Cable Output | |||||||
| Code | Structure&Material | |||||||
| X | Other | |||||||
| Code | Additional Functions | |||||||
| G | Gauge Pressure(Default) | |||||||
| v | Fluororubber O-Ring | |||||||
| W | water-proof and well-ventilated | |||||||
| HPM131 | (0~10)kPa | B1 | P3 | C2 | X | G v W | ||
| HPM126(click) for additional tank mainly | HPM180(click) Universal pressure transmitter | HPM310(click) Air differential pressure transmitter, bubble method for level measure |
| | |
| 0...100 mbar 0...200 mbar 0...300 mbar 0...400 mbar | -100kPa…0~2kPa…100MPa | -100kPa...0~200PA...100kPa |
