Audited Supplier
HPM47W-C
Level sensor
SemiConductor Type
Ceramic Pressure Transmitter
Analog Type
Integration
Metal, PTFE, PVDF, PVC PP
NA
Two-Wire
Liquid
IP68
ISO9001
Customized
Ceramic capacitor Pressure Sensor
0~0.5...200mH2O
2 times the full scale
0.2%F.S.
0.1%FS/year
24VDC
4-20mADC, 0~5VDC or Modbus RTU/RS485
Optinal
-10~70ºC
IP68
Plastic(PP,PVC, PTFE, PVDF) or metal(316L, TI)
PTFE, PU
Plastic probe: -10~70ºC, metal probe:-20~80&o
HIGHJOIN
Carton
China
90262010
Product Description
HPM47W (with ceramic capacitive sensor) anti corrosion pressure transmitter is a fully sealed submersible structure and uses an anti corrosion ceramic capacitive pressure sensor. The probe put into the measured medium is made of 316L, titanium alloy or
corrosion resistant materials such as PVDF, PP, PTFE or PVC, and the gas conductive cable is made of with PTFE or polyurethane jacket . It is mainly used for liquid level measurement of corrosive media such as acids and alkalis or s ewage, seawater and other media and all high demand liquid level measurement.
* The size is the distance between the induction diaphragm and the bottom
corrosion resistant materials such as PVDF, PP, PTFE or PVC, and the gas conductive cable is made of with PTFE or polyurethane jacket . It is mainly used for liquid level measurement of corrosive media such as acids and alkalis or s ewage, seawater and other media and all high demand liquid level measurement.
- High purity ceramic (99.9% Al2O3 ) capacitive sensor
- Fluorine rubber ring waterproof seal for plastic probe Full welding process for
metal probe. - Corrosion resistant design of probe and cable
- Large measuring range, from 0.5 meters to 4 00 meters h igher range can be
customized. - Full potting process, containing polymer sieve to prevent condensation
- Multiple protection and sealing structure design
- Plastic probe has built in counterweight
| Measuring Range | |||||||||
| Rated range (Gauge pressure,kPa*) | 10 | 20 | 40 | 100 | 200 | 400 | 1000 | 2000 | 4000** |
| Min Range (Gauge pressure,kPa) | 5 | 10 | 20 | 50 | 100 | 200 | 500 | 1000 | 2000 |
| Overload(kPa) | 400 | 600 | 600 | 1000 | 1800 | 2500 | 4000 | 4000 | 6000 |
| *The measurement unit can be converted to mH2O@4ºC, inH2O@4ºC, m, mm, etc. When using m, mm, etc. as the unit, please give the density value of the measurement medium. **Range only available for metal probe | |||||||||
| Measuring Medium | Various liquids compatible with contact materials |
| Output Signal/Power Supply (1) | 4~20mADC / Vs=10~30 VDC |
| Output Signal/Power Supply (2) | 4~20mADC+HART / Vs=12~32 VDC |
| Output Signal/Power Supply (3) | 0~5V etc. /Vs=10~30 VDC |
| Output Signal/Power Supply (4) | Modbus-RTU/RS485 /Vs =3~8 VDC or 10~30 VDC |
| Accuracy *Accuracy complies with IEC 60770 (non-linearity, hysteresis, repeatability) | ±0.25%FS(typical); ±0.1%FS(with HART) |
| Load characteristics | 4~20mADC 2-wire: RL≤(U-10)/0.02Ω 4~20mADC+HART 2-wire: RL≤(U-12)/0.02Ω Voltage output, 3-wire: RL>10kΩ |
| Long-term Stability | ±0.2%FS/year |
| Response time | About 1ms |
| Startup time | ≤3s |
| Compensation temperature range | -20~80ºC |
| Temperature Coefficient of Zero | ±1.0%FS (in compensation temperature range) |
| Temperature Coefficient of Full Scale | ±0.8%FS (in compensation temperature range) |
| Operation Temperature | Plastic Probe: -10~70ºC Note: The operating temperature of PVC material products is 0~60ºC; the operating temperature of PP material products is 0~70ºC Metal probe: -20~80ºC |
| Medium Temperature | Plastic Probe: -10~70ºC; Metal probe: -20~80ºC |
| Storage Temperature | Plastic Probe: -10~70ºC; Metal probe: -20~80ºC |
| Protection Grade | IP68(for probe) |
| Short circuit protection | With |
| Ordering Code | Part | Note |
| DF | Probe Shell material | PVDF,Density 1.78g/cm3,Shore hardness 77, applicable temperature -10~140ºC |
| PC | PVC,Density 1.45g/cm3,Shore hardness 79, applicable temperature 0~60ºC | |
| PP | PP, Density 0.91g/cm3,Shore hardness 72, applicable temperature 0~100ºC | |
| FE | PTFE,Density 2.17g/cm3,Shore hardness 54~60, applicable temperature -200~260ºC | |
| S6 | 316L | |
| TI | titanium alloy | |
| M5 | Pressure sensor | Ceramic Al2O3 99.9% |
| FK | Sealing ring | FKM(applicable temperature -20~200ºC) |
| FF | FFKM(More corrosion resistant,applicable temperature -25~300ºC) | |
| C2F | Cable | PTFE,outer diameter(7.2±0.2)mm |
| C2U | PU,outer diameter(7.2±0.2)mm |
| Probe | ||||||
| Material | PVC | PP | PVDF | PTFE | 316L | TI |
| Weight (Cable not included) | ~500 | ~450 | ~550 | ~600 | ~660 | ~400 |
| Cable | ||
| Material | PTFE | PU |
| Weight(1m) | ~60 | ~50 |
| Plastic Probe | Metal Probe | ||
| | | |
* The size is the distance between the induction diaphragm and the bottom
| Thread installation (W1) dimension |
weight:~400g 1.Used for fixing and supporting the whole product on the top 2. Besides G1 thread, other threads can be customized if needed |
