HVAC 2nm on/off Electric Control Air Damper Actuator 24 Volt Damper Actuator

Features of S6061-02 Standard Damper Actuator (Non Fail-Safe Damper Actuators)

• Torque 02NM

• Power supply AC/DC 24V or AC 230V

• 2 and 3 point control 

• Convenient install: Fix on throttle axis through the universal holding device.

• Manual control: Manual control through buttons available in the case.

• High reliability: The actuator itself has the ability to over-loading protect. It stops automatically without a limit switch.

• Mechanical limit: A mechanical limit operator is placed inside.

• Output signal:Output a signal amount 0-100%.
  
   

  Technical datasheet of S6061-02 Standard Damper Actuator (Non Fail-Safe Damper Actuators)

   

  Item	S6061-02AN(F)/ 24V	S6061-02AN(F)/ 220V	S6061-02DN(F)/ 24V	S6061-02DN(F)/ 220V
  Torque	2Nm
  Damper area	0.5m2
  Running time	45-55S		35-45S
  Power supply	AC/DC24V 50/60Hz	AC230V 50/60Hz	AC/DC24V 50/60Hz	AC230V 50/60Hz
  Operating power consumption	2.5W	2.5W	2W	1.5W
  Wire size	4.5VA
  Weight	0.6 Kg
  Control signal	2-10V	0-10V	2/3 point
  Angle of rotation	0~90°(Max 93º)
  Rotate direction	L/R switch
  Auxiliary switch rating	3(1.5)Amp 250V
  Life cycle	>70 000
  Noise	Max 45dB
  IP level	IP54
  Temperature	-20~+50ºC
  Humidity	5~95%RH
  Storage temperature	-40~+70ºC
  Certificate	CE

Wiring diagram of S6061-02 Standard Damper Actuator (Non Fail-Safe Damper Actuators)

Outline size of S6061-02 Standard Damper Actuator (Non Fail-Safe Damper Actuators)