Audited Supplier
SF-6931
9002-84-0
(C2f4)N
204-126-9
Carbon Chain Polymer
White
Haiflon
Carton Case
25KGS
China
39046100
Product Description
Haiflon® PTFE Fine Powder SF-6931
Haiflon® SF-6931 PTFE Fine Powder resin for paste extrusion is generally used for coaxial cable and tube push-formed products with good continuity, smooth appearance and no burr; smooth products after sintering, with good mechanical and electrical properties.
Application:
Translucent, suitable for high frequency coaxial cable
Grade & Characteristics
Product Features
The product has Excellent transparency, excellent electrical insulation performance, high and low temperature resistance, high lubrication, non-viscosity, chemical resistance and weather resistance, good processing performance etc.
Safety precautions for using PTFE fine powder
1. The work area are should keep well-ventilated, as toxic gases of HF and COF2 liberated during hot processing. During the incineration of polymer, the acid gases must be eliminated by alkali filteration before emission.
2. Workers should avoid breathing in harmful gases emitted in the process and wear necessary labor protection stuff.
3. Smoking in working area is prohibited to avoid inhalation of toxic gases liberated from smoking contaminated with PTFE powder.
4. Void the inhalation of PTFE resin and eye contact
5. After processing, have a complete cleanup of face and hands.
6. The wastes produced in the processing must be disposed by specialized personal and disposal should be in compliance with the waste disposal regulations of the relevant district and country respectively
7. Before using PTFE powder, please read the safety data sheet carefully.
Storage & Handling
The products should be stored in clean, cool, shady, draughty and dry warehouses so as to avoid the contamination of dust and moisture. During transportation, shearing must be avoided to prevent the resin from any cases of agglomerate.
Packing
Product is packed in double layer plastic bags, inside bag is made of polyethylene resin, and outside bag is made of polyvinyl chloride.
The bags are packed in cardboard drums lined with moisture-proof plastic film.
Net weight of per drum is 25kgs
Product can also be packed according to customer's requirement.
Haiflon® SF-6931 PTFE Fine Powder resin for paste extrusion is generally used for coaxial cable and tube push-formed products with good continuity, smooth appearance and no burr; smooth products after sintering, with good mechanical and electrical properties.
Application:
Translucent, suitable for high frequency coaxial cable
Grade & Characteristics
| Item | Unit | Typical Value |
| Bulk Density | g/l | 490 |
| Average Particles Size | um | 525 |
| Moisture content | % | 0.02 |
| Specific Gravity | 2.17-2.21 | |
| Tensile Strength | Mpa | 31 |
| Elongation at break | % | 525 |
| Highest Reduction Ratio | 4000:1 | |
| Reduction Ratio | 1500:1 |
Product Features
The product has Excellent transparency, excellent electrical insulation performance, high and low temperature resistance, high lubrication, non-viscosity, chemical resistance and weather resistance, good processing performance etc.
Safety precautions for using PTFE fine powder
1. The work area are should keep well-ventilated, as toxic gases of HF and COF2 liberated during hot processing. During the incineration of polymer, the acid gases must be eliminated by alkali filteration before emission.
2. Workers should avoid breathing in harmful gases emitted in the process and wear necessary labor protection stuff.
3. Smoking in working area is prohibited to avoid inhalation of toxic gases liberated from smoking contaminated with PTFE powder.
4. Void the inhalation of PTFE resin and eye contact
5. After processing, have a complete cleanup of face and hands.
6. The wastes produced in the processing must be disposed by specialized personal and disposal should be in compliance with the waste disposal regulations of the relevant district and country respectively
7. Before using PTFE powder, please read the safety data sheet carefully.
Storage & Handling
The products should be stored in clean, cool, shady, draughty and dry warehouses so as to avoid the contamination of dust and moisture. During transportation, shearing must be avoided to prevent the resin from any cases of agglomerate.
Packing
Product is packed in double layer plastic bags, inside bag is made of polyethylene resin, and outside bag is made of polyvinyl chloride.
The bags are packed in cardboard drums lined with moisture-proof plastic film.
Net weight of per drum is 25kgs
Product can also be packed according to customer's requirement.
