Hair Loss Follicular Extraction Transplant Device (AC type)

Hair Loss Follicular extraction transplant device(AC type)

Features:
Ultra smooth/quiet/vibration Free
Easy bit change
Compact & light weight
Variable speed control: 0-35000RPM
Punch:0.8mm/1.0mm/1.2mm
Automatic switching 110/220 volts

Packing including:
1. Motor: 1 piece
2. Handpiece: 1 piece
3. punch: 10 pieces
4. tweezer: 2 pieces (straight and curved)
5. implanter pen: 3 pieces (0.8mm/1mm/1.2mm)
6. silicon block for follicular: 1 piece
7. implantation knife handle and blade: 1 set
8. 12V/2A adapter

Using the handpiece
1.Connect the adapter and insert the three -core plug arrow in the direction of the three-core plug  arrow of the machine.
2.Twist open the chuck and install the punch into the collet,and then twist to close.
3.Turn "ON"the machine by rotating the variable speed dial clockwise. IMPORTANT!DO NOT
operate the electric file without a bit or blank in the handpiece.
4.Select the speed by turning the variable knob, clockwise to increase speed, counter clockwise to reduce speed.
5.Hold the handpiece as  indicated in the photo for proper control.
6.IMPORTANT! Always turn off the machine when not in use.
7.IMPORTANT!DO NOT operate file without a bit or blank in the handpiece.
8.IMPORTANT! Please replace the blank pin in the handpiece when it is not in use.