Audited Supplier
GVS-001
Magnetic Displacement Sensor
Digital Type
Angular Displacement
Integration
Stainless Steel
IP65
CE
Customized
5mm (0.2inch) Max
0-100kHz
Yuanben
Carton
Shanghai
Product Description
GVS-001 Hall-Effect Gear Speed Sensor
Description
GVS Series Tooth Sensors use a magnetically biased Hall effect integrated circuit to accurately sense movement of ferrous metal targets. This specially designed I.C., with discrete capacitor and bias magnet, is sealed in a probe type package for physical protection and cost effective installation.
Output is digital, current sinking (open Collector). Reverse polarity protection is standard. If power is inadvertently wired backwards, the sensor will not be damaged.
Optimum sensor performance is dependent on the following variables which must be considered in combination:
Features
Typical Applications
Automotive and Heavy Duty Vehicles:
Specifications
Photos
Description
GVS Series Tooth Sensors use a magnetically biased Hall effect integrated circuit to accurately sense movement of ferrous metal targets. This specially designed I.C., with discrete capacitor and bias magnet, is sealed in a probe type package for physical protection and cost effective installation.
Output is digital, current sinking (open Collector). Reverse polarity protection is standard. If power is inadvertently wired backwards, the sensor will not be damaged.
Optimum sensor performance is dependent on the following variables which must be considered in combination:
- Target material, geometry, and speed
- Sensor/target gap
- Ambient temperature
- Magnetic material in close proximity
Features
- Senses ferrous metal targets
- Digital current sinking output (open collector)
- Better signal-to-noise ratio than variable reluctance sensors, excellent low speed performance, output amplitude not dependent on RPM
- Sensor electronically self-adjusts to slight variations in runout and variations in temperature, simplifying installation and maintenance
- Fast operating speed - over 100 kHz
- EMI resistant
- Reverse polarity protection and transient protection (integrated into Hall I.C.)
- Wide continuous operating temperature range
Typical Applications
Automotive and Heavy Duty Vehicles:
- Camshaft and crankshaft speed/position
- Transmission speed
- Tachometers
- Anti-skid/traction control, ABS system
- Sprocket speed
- Chain link conveyor speed and distance
- Stop motion detector
- High speed low cost proximity
- Tachometers, Counters
- Gear tooth Sensor
Specifications
| Item | Parameter |
| P/N | GVS-001 |
| Supply Voltage | 5~24Vdc |
| Target Speed | 0~12000rpm |
| Output Voltage | 400mv |
| Output Current | 100mA |
| Frequency Range | 0-100KHz |
| Output Signal | Square pulse single channel |
| Operating temperature | -40ºC~125ºC |
| Protection Class | IP 65 |
| Operating Air Gap | 0.5~5mm |
| Mounting Direction | Mark on the bottom face according to the direction, the mounting axis is perpendicular to the direction of rotation. |
| Mounting Mode | M16*1.0 threads and 2 jam nuts to secure the sensor |
| Protection | Short circuit protection and reverse polarity protection |
| Housing | Ni plated brass housing, with LED indicator |
| Cable | AWG24# Teflon langth 500mm |
| NOTE | Shielded Cable for particularly noisy environment or the length of cable is over 1500mm. |
| Gear Material | Low carbon steel |
| Gear Information | Diameter is 120mm; Thickness: 6mm Tooth width: 3mm; Valley width: 3mm Valley depth: 3mm |
Photos
