




This product has four screw feet contact with the ground, must be in hardened ground contact with the ground reliably, rubber soft cover hand turn
No movement shall prevail. Screw foot remaining 3 wires, tighten the 24 or 22# fixing screws, uneven ground please pad iron plate.
Installation procedure:
1.Rotate the universal scale leg 3cm to fine-tune the height
2.Loosen the screws at the bottom of the beam to remove the line
3.Connect the loadometer wire pair to the display
4.Installation completed
Model and specification | Table size (m) | Maximum weighing (kg) | Minimum Weighing (Kg) | Index value (g) |
SCS-1T | 1.2×1.2 | 1000 | 10 | 0.5 |
SCS-2T | 1.5×1.5 | 2000 | 20 | 1 |
SCS-3T | 1.5×1.5 2×1.5 | 3000 | 20 | 1 |
SCS-5T | 4×2 | 5000 | 40 | 2 |