Audited Supplier
Safety protection:
Front overhead guard net protects the operator and instrument from falling goods.
The load backrest is equipped to ensure unstable goods in cold storage.
Rear handle with horn button ensures safety while reverse driving.
Automatic deceleration when steering is suitabe for slipped surface in the cold stoage.
Anti-rust, anti-corrosion, waterproof:
Stainless steel is used for exposed fasteners and it is rust proof.
Waterproof AMP connectors prevent the condensed water from entering which may
cause a short circuit.
Tilting cylinder cover protects oil cylinder against direct exposure.
Chain and cylinder are coated with special material to prevent corrosion and rust.
Oil and parts resistant to low temperature:
Key parts, such as motors, controllers and switch components can work in the - 30 ºCenvironment.
The hydraulic oil, gear oil and lubricating grease can satisfy the requirement of low
temperature work environment;
High pressure rubber hoses with special material are suitable for low temperature.
Low energy consumption:
LED lamps save the energy.
Model | / | CPD25 |
Power type | / | Battery |
Rated capacity | kg | 2500 |
Load center | mm | 500 |
Lift height | mm | 3000 |
Mast tilt angle (forward/backward) | Deg | 6/12 |
Front overhang | mm | 483 |
Wheel-base | mm | 1500 |
Tread(front/rear) | mm | 970/950 |
Travel brake | / | Hydraulic-Foot pedal |
Parking brake | / | Mechanical-Hand leverG |
Lift speed(with/without load) | mm/s | 260/400 |
Lower speed (with/without load) | mm/s | (with load)<600,(without load)>300 |
Travel speed (with/without load) | km/h | 11/12 |
Max. gradeability (with load) | % | 10 |
Motor | Driving motor(Model) | / | XQ-6.3-1T |
| Driving motor(Rated power) | kw | 6.3 |
| Driving motor(Rated rotation) | r/min | 1200 |
Working motor | Working motor(Model) | / | XQD-8.6-C |
| Working motor(Rated power) | kw | 8.6 |
| Working motor(Rated rotation) | r/min | 1550 |
Controller | Manufacturer | / | GE |
| Type | / | MOSFET |
Battery | Voltage | v | 48 |
| Capacity | Ah | 630 |
| Size(L×W×H) | mm | 820×1065×520 |
Gearbox | Transmission type | / | Mechanical |
Tire | type | / | Pneumatic tyre |
| Model(Front) | / | 7.00-12-12PR |
| Model(Rear) | / | 18×7-8-14PR |
Self.weight | kg | 4240 |
Free lift height | mm | 140 |
Fork (Thickness×Width×Length) | mm | 40×125×1070 |
Min. turning radius | mm | 2100 |
Overall dimensions : Overall length(without forks) | mm | 2430 |
Overall dimensions : Overall width | mm | 1150 |
Overall dimensions : Overall height(Extended height(mast) | mm | 4030 |
Overall dimensions : Overall height(Lower height(mast)) | mm | 1995 |
Overall dimensions : Overall height(Overhead guard) | mm | 2150 |
Min. under ground clearance : Under mast | mm | 110 |
Min. under ground clearance : Center of wheel-base | mm | 120 |
