Audited Supplier
High Chrome Cr26 Stone Crusher Parts
1-Introduction of Jaw Crusher Parts
Jaw plate is manufactured with super high manganese steel, therefore it has a service life 50~100% longer than those made of traditional high manganese steel. Every model of PE series jaw crushers is tested for shock, stress, strain, thermal loading, deformation, vibration and noise under a wide range of load conditions. The special processing techniques ensure that our jaw plate has leading performance:
1)Using cold processing hardening technology, the hardness is improved.
2)Water toughening technology to avoid making the performance poor during the process of natural phase change.
2- Introduction of Cone Crusher Parts
which is designed to protect the Cone Crusher, thus improves the working life.We supply high qualified concave in high Cr, Mo, alloy steel for Cone Crusher.
Cone Crusher Parts
1. Spare parts for Cone Crusher.
2. Be used in manganese steel
3. We can do as per customer's requirements.
We manufacture an extensive range of wear and spare parts in China for the worlds most popular crushing brands, like the spare parts for the below crushers.
Crusher type | Model | Spare parts |
Cone crusher | HP100, HP200, HP300, HP400, HP500, HP4, HP5, GP100, GP200, GP300, GP550, GP11 | Bowl liner, mantle |
H2800, H3800, H4800, H6800, H7800, H8800, S2800, S3800, S4800, S6800 | ||
4FT.Standard, 4-1/4FT.Short head , 5-1/2FT.Standard |
Features of cone crusher wear parts :
1) Material: high manganese steel:Mn13Cr2, Mn18Cr2, etc;
2) Use: Machinery in metal recovery smash, mine, metallurgy, chemical industry, cement, petroleum etc.
3) Production quality testing: High frequency infrared carbon & sulfur analyzer, Metallographic microscope, Machinery performance testing equipment, Hardness testing equipment, Ultrasonic inspection equipment
4) Easy installation: The anti-abrasion block is a semi-permanent part, which is easy for replacement.
Chemical composition of cone crusher wear parts
Code Elem | C | Mn | Si | Cr | Mo | P | S |
ZGMn13-1 | 1-1.45 | 11-14 | 0.3-1 | - | - | ≤0.09 | ≤0.04 |
ZGMn13-2 | 0.9-1.35 | 11-14 | 0.3-1 | - | - | ≤0.09 | ≤0.04 |
ZGMn13-3 | 0.9-1.35 | 11-14 | 0.3-0.8 | - | - | ≤0.09 | ≤0.04 |
ZGMn13-4 | 0.9-1.3 | 11-14 | 0.3-0.8 | 1.5-2 | - | ≤0.09 | ≤0.04 |
ZGMn13-5 | 0.75-1.3 | 11-14 | 0.3-1 | - | 0.9-1.2 | ≤0.09 | ≤0.04 |
3-Introduction of Impact Crusher Parts
Blow bar Made by high wear-resisting material:high chrome cast-iron and high-manganese steel.
We manufacture an extensive range of wear and spare parts in China for the worlds most popular crushing brands.
Chemical composition of Impact Crusher Parts
NO. | chemical composition % | HRC | ||||||||
C | Si | Mn | Cr | Mo | Na | Cu | P | S | ||
KmTBCr4Mo | 2.5-3.5 | 0.5-1.0 | 0.5-1.0 | 3.5-4.5 | 0.3-0.5 | - | - | ≤0.15 | ≤0.10 | ≥55 |
KmTBCr9Ni5Si2 | 2.5-3.6 | 1.5-2.2 | 0.3-0.8 | 8.0-10.0 | 0-1.0 | 4.5-6.5 | 4.5-6.5 | - | - | ≥58 |
KmTBCr15Mo | 2.8-3.5 | ≤1.0 | 0.5-1.0 | 13-18 | 0.5-3.0 | 0-1.0 | 0-1.0 | ≤0.10 | ≤0.06 | ≥58 |
KmTBCr20Mo | 2.0-3.3 | ≤1.2 | ≤2.0 | 18-23 | ≤3.0 | ≤2.5 | ≤1.2 | - | - | ≥60 |
KmTBCr26 | 2.3-3.3 | ≤1.2 | ≤1.0 | 23-30 | ≤3.0 | ≤2.5 | ≤2.0 | - | - | ≥60 |
Production Process of Crusher Wear Parts
