Audited Supplier
2. Olefin
3. Industry
4. Coal chemical
5. Oil refining
HPA/HPB petrochemical process pump is designed for converying clear liquid media, or liquid media containing few particles, or low temperature/ high temperatureliquid media, or neutral / corrosive liquid media. It meets wirh AP1610 standard.
Wetted parts comply to ASTM standard, common material as follows:
1. 12% chrome steel
2. Stainless steel
3.Duplex stainless steel
3.Cast titanium
4. Hastelloy
1. Relative humidity during continous operation max.90%
2. Ambient temperature max.40ºC, min.4ºC
3. Permissible altitude up to 1000m above sea level
The permissible operating range of centrifugal pumps depends on:
1. Impeller shape
2. Speed
3. Vibration
4. Medium charateristics
5. Bearing and shaft load
6. Heat dissipation-particularly with regard to insulated volute casings and the corrosion resistance of materials
7. The net positive suction head of the working condition and NPSH
The pump outlet pressure at the outlet nozzle depends on:
1. The pump inlet pressure
2. The maximum total head of the selected impeller diameter
3. The density of the medium to be pumped
| Min. Flow Rate | 3m³/h |
| Max. Flow Rate | 2250m³/h |
| Min. Head | 3m |
| Max. Head | 230m |
| Min. Operating Temperature | -80ºC |
| Max. Operating Temperature | 450ºC |
