Audited Supplier
hc
Long Time
12months
Flotation Machine
Physical Treatment
Industrial, Home, Agriculture, Hospital
Stone Crusher
CE RoHS
Water and Wastewater Treatment Industrial Water Tr
Waste Water Treatment Plants Industrial Waste Wate
HC FLOURISH
Wooden Case
Made in China
8479899990
Product Description
Product overview:
Split-type concentrated belt filter(BSDY2000-BSDY3000):Due to the use of split structure, according to the water concentration of sludge and user needs, the length of the concentrator can be changed in a large range, the processing capacity is special Large, especially applicable to large-scale mine tail mud, large-scale sand washing field, stone field sand mud dehydration, ceramic raw material mud, washing mountain sand, soil-packed sand mud dehydration, river silting and other industrial sludge deep dewatering treatment and the use of large sewage plants.
How it works:
Sludge through the conveyor pump into the dynamic (static) state mixer, and the concentration added at the same time is 0.05 to 0.1% yin (yang) from the sub-flocculant solution mixed and fully reacted, slag (mud) in the plasma of small solid particles (or suspended matter) condensed into a larger volume of flocs, the combined water between the material and surface water is separated into free water, when the material is transported to spread To the filter network of the long gravity pre-dehydration zone (or belt concentrator), free water permeates the back of the filter under the action of gravity and seeps out and separates, forming a non-flowing state of sludge, reaching the maximum pressure condition of the pressing dewatering zone, and then clamping between the upper and lower two net belts with the movement of the net belt, through the filter belt with adjustable tension and the diameter gradually decreasing rollers and rollers. The implementation of continuous increase of slow pressure on the roller squeeze, shear force effect, through the wedge area, low pressure zone, medium pressure area, high pressure area and strong roller squeeze area will be the slag (mud) slurry through step-by-step pressure of the way to continuously squeeze out, and finally form a low moisture content filter discharge, scraped off through the scraper plate, up and down the filter belt separate, after high-pressure flushing water and roller brush to remove the filter surface pores in the trace particles, continue to enter the next step of dewatering cycle.
Performance characteristics:
1,design instructions: the use of new pressure filter process design, set concentrated pressure filter and roller pressing in one of the dewatering structure, focusing on the enrichment process and pressure filtration process has a great technical improvement, equipped with an independent concentrator, added a net belt, put into operation effect is good, well received by users.
2,functional features: the processing capacity is about 1.5 larger than ordinary machine, filter cake moisture content is less than 10% lower than ordinary models. Wide range of use, mainly suitable for large-scale mine tail mud,I large-scale sand washing field, stone field sand mud dehydration, ceramic raw material mud, sand washing, soil-packed sand mud dehydration, river silting and other industrial sludge deep dewatering treatment and the use of large sewage plants.
Application range:
Split-type concentrated belt filter is particularly suitable for large-scale mine tail mud, large-scale sand washing field, stone field sand mud dehydration, ceramic raw material mud, washing mountain sand, soil-packed sand mud dehydration, river silting and other industrial sludge deep dewatering treatment and the use of large sewage plants.
Split-type concentrated belt filter(BSDY2000-BSDY3000):Due to the use of split structure, according to the water concentration of sludge and user needs, the length of the concentrator can be changed in a large range, the processing capacity is special Large, especially applicable to large-scale mine tail mud, large-scale sand washing field, stone field sand mud dehydration, ceramic raw material mud, washing mountain sand, soil-packed sand mud dehydration, river silting and other industrial sludge deep dewatering treatment and the use of large sewage plants.
How it works:
Sludge through the conveyor pump into the dynamic (static) state mixer, and the concentration added at the same time is 0.05 to 0.1% yin (yang) from the sub-flocculant solution mixed and fully reacted, slag (mud) in the plasma of small solid particles (or suspended matter) condensed into a larger volume of flocs, the combined water between the material and surface water is separated into free water, when the material is transported to spread To the filter network of the long gravity pre-dehydration zone (or belt concentrator), free water permeates the back of the filter under the action of gravity and seeps out and separates, forming a non-flowing state of sludge, reaching the maximum pressure condition of the pressing dewatering zone, and then clamping between the upper and lower two net belts with the movement of the net belt, through the filter belt with adjustable tension and the diameter gradually decreasing rollers and rollers. The implementation of continuous increase of slow pressure on the roller squeeze, shear force effect, through the wedge area, low pressure zone, medium pressure area, high pressure area and strong roller squeeze area will be the slag (mud) slurry through step-by-step pressure of the way to continuously squeeze out, and finally form a low moisture content filter discharge, scraped off through the scraper plate, up and down the filter belt separate, after high-pressure flushing water and roller brush to remove the filter surface pores in the trace particles, continue to enter the next step of dewatering cycle.
Performance characteristics:
1,design instructions: the use of new pressure filter process design, set concentrated pressure filter and roller pressing in one of the dewatering structure, focusing on the enrichment process and pressure filtration process has a great technical improvement, equipped with an independent concentrator, added a net belt, put into operation effect is good, well received by users.
2,functional features: the processing capacity is about 1.5 larger than ordinary machine, filter cake moisture content is less than 10% lower than ordinary models. Wide range of use, mainly suitable for large-scale mine tail mud,I large-scale sand washing field, stone field sand mud dehydration, ceramic raw material mud, sand washing, soil-packed sand mud dehydration, river silting and other industrial sludge deep dewatering treatment and the use of large sewage plants.
Application range:
Split-type concentrated belt filter is particularly suitable for large-scale mine tail mud, large-scale sand washing field, stone field sand mud dehydration, ceramic raw material mud, washing mountain sand, soil-packed sand mud dehydration, river silting and other industrial sludge deep dewatering treatment and the use of large sewage plants.
| brand Flourish Types of sludge treatment equipment Sludge dewatering press The amount of processing 1-50(t/h) Total power 15kw Additive ratio 1:1 No trouble time 200000h Pool diameter 5-10(m) The pool is deep 5m Land for sale nationwide Model Hc |
