Audited Supplier
BS-08
All Kinds
Acrylic
Acrylic Topcoat
503%
Brush
1.30.1g/Ml
Single Item
Surface-Treated Steel Substrates
Pl
6.5X6.5X19.Cm
One-Component,Stir Well with Mechanical Stirring
40um
80um
Liquid Coating
20.000 Kg
0.104kg/M/40um
0.5h
Jinglin
Jiangsuchina
Product Description
Color | All kinds |
Mixing ratio (weight) | One-component,Stir well with mechanical stirring |
Specific gravity (after mixing) | 1.3±0.1g/ml |
Bulk solids | 50±3% |
Typical dry film thickness | 40um |
Typical wet film thickness | 80um |
Theoretical coating rate | 0.104kg/m²/40um |
Surface stem | ≤0.5h |
Practical | ≤2h |
Fully cured | 7d |
Mixed use period | There is no activation period limit for single components |
Diluent | Special thinner for PT |
Applicable substrates | Surface-treated steel substrates |
Front-end coating | Acrylic primer |
Back-end coating | - |
Product Introduction
It is composed of thermoplastic acrylic resin, pigment, and auxiliary solvent. It has good color retention, initial water
resistance, construction performance, and rapid drying.
Product Use:
It is suitable for providing protection and decoration for outdoor walls, steel structures, mechanical equipment, motors, etc.
It is composed of thermoplastic acrylic resin, pigment, and auxiliary solvent. It has good color retention, initial water
resistance, construction performance, and rapid drying.
Product Use:
It is suitable for providing protection and decoration for outdoor walls, steel structures, mechanical equipment, motors, etc.
Q1 Are you a manufacturer and support factory site visits?
A: We are a professional paint manufacturer with more than 30 years of experience and support buyers to visit our factory.
Q2 What are your main products?
A: Our main products are all kinds of industrial anti-corrosion coatings, marine coatings, floor coatings, new water-based
environmental protection coatings, automotive coatings and so on.
Q3 Is the coating product sold by your company in compliance with the relevant entry permit for each country?
A: All types of coating products produced by our company are in compliance with international relevant quality standards and requirements. For some countries, there are special access certification licenses. Our company will conduct targeted product verification.
Q4 Does your company still need an international agent to join?
A: To meet the requirements of customers, we welcome you to become our agent dealer, become our agent dealers will receive more favorable prices and account period support, specific operation details please contact our company account manager to confirm.
A: We are a professional paint manufacturer with more than 30 years of experience and support buyers to visit our factory.
Q2 What are your main products?
A: Our main products are all kinds of industrial anti-corrosion coatings, marine coatings, floor coatings, new water-based
environmental protection coatings, automotive coatings and so on.
Q3 Is the coating product sold by your company in compliance with the relevant entry permit for each country?
A: All types of coating products produced by our company are in compliance with international relevant quality standards and requirements. For some countries, there are special access certification licenses. Our company will conduct targeted product verification.
Q4 Does your company still need an international agent to join?
A: To meet the requirements of customers, we welcome you to become our agent dealer, become our agent dealers will receive more favorable prices and account period support, specific operation details please contact our company account manager to confirm.
