Audited Supplier
As your requirements
PU
Dust Seal
Hydraulic Cylinder Piston and Rod
High Speed
Pressure Type
Standard, Nonstandard, Customized
High Pressure
Wear-Resistant, Durable, Resistant, Dustproof
30-95 Shore a
Un ODU Idu Dhs Spgw Dkbi
Red, Orange, Green, Blue or as Your Requirements
XINKARRY
Cartons or as Your Requirements
30*38*6
Made in China
4016931000
Product Description
High Pressure Rubber Polyurethane Oil Seals Hydraulic Seal UN Seals
Polyurethane oil seals are mainly used in hydraulic cylinders, which are easy to install and can scrape off dust adhering to the piston rod. The green polyurethane oil seal has slightly lower hardness, while the blue one has higher hardness and can withstand greater pressure. Polyurethane oil seals have excellent physical and mechanical properties, wear resistance, and oil resistance, making them suitable for the most demanding working conditions. They effectively prevent the entry of external impurities, thereby achieving excellent sealing performance. They are the most commonly used sealing components in medium and high pressure hydraulic cylinders.
We specialized in the development and production of sealing systems which were used in the Metallurgical,Electrical,Auto, Engineering machinery, Light industrial machinery and Electrical appliance manufacturing industries. XINKARRY focus on customers' needs,as a dependable partner and reliable supplier to help you resolve supply or technical problems ,and improve the performance of your equipments or your business. When you are facing emergency repairs situation or urgent orders,the highly responsive team of XINKARRY will offer you very short lead time. XINKARRY has a global sales network,and our seals have been sold to more than 100 countries or areas ,Such as America, England, Canada, Australia, Russian Federation ect .
Polyurethane oil seals are mainly used in hydraulic cylinders, which are easy to install and can scrape off dust adhering to the piston rod. The green polyurethane oil seal has slightly lower hardness, while the blue one has higher hardness and can withstand greater pressure. Polyurethane oil seals have excellent physical and mechanical properties, wear resistance, and oil resistance, making them suitable for the most demanding working conditions. They effectively prevent the entry of external impurities, thereby achieving excellent sealing performance. They are the most commonly used sealing components in medium and high pressure hydraulic cylinders.
| Application | Type | Material |
| Rod Seals | UN | TPU(PU,Polyurethane) |
| UNS | TPU(PU,Polyurethane) | |
| UHS | TPU(PU,Polyurethane) | |
| IDU | TPU(PU,Polyurethane) | |
| U+S | PU+NBR | |
| UPH | NBR & FKM | |
| Step Seal | NBR+PTFE | |
| VES | Rubber+Fabric | |
| IDI | PU | |
| ISI | PU | |
| Piston Seals | SPG | NBR+PTFE |
| SPGW | NBR+PTFE | |
| SPGO | NBR+PTFE | |
| KDAS | NBR+PU+POM | |
| ODI | PU | |
| OSI | PU | |
| ODU | PU | |
| Dust Wiper Seals | DH/DHS | PU |
| LBH | NBR & FKM | |
| J/JA | PU | |
| DKB | NBR & FKM +Metal | |
| DKBI | PU+Metal | |
| DSI | PU | |
| Wear Ring | WR | Phenolic Fabric |
| Guide Tape | PTFE | |
| Guide Tape | Phenolic Fabric | |
| Buffer Seal | HBY | PU+Nylon |
| Back-up Ring | O-Ring | NBR & FKM |
| X-Ring | NBR & FKM | |
| PTFE Washer | PTFE |
Proper use of Polyurethane seal,should pay attention to the following points:
1. Improve lubrication quality, control oil pressure, temperature and flow, and strengthen oil filtering.
2. Use fuel and lubricants that meet the requirements.
3. In order to control the temperature state of the diesel generator set, it is not suitable to work under the condition of overcooling or overheating. In cold weather, the diesel engine should be preheated before starting, and the crankshaft should be turned by hand to allow the oil to enter the friction surface.
4. The surface quality of the piston rod and journal should be strictly guaranteed.
5. The piston rod clearance should be appropriate. If the generator set is too large, it will cause an impact, and if the generator set is too small, the lubricity will deteriorate.
We specialized in the development and production of sealing systems which were used in the Metallurgical,Electrical,Auto, Engineering machinery, Light industrial machinery and Electrical appliance manufacturing industries. XINKARRY focus on customers' needs,as a dependable partner and reliable supplier to help you resolve supply or technical problems ,and improve the performance of your equipments or your business. When you are facing emergency repairs situation or urgent orders,the highly responsive team of XINKARRY will offer you very short lead time. XINKARRY has a global sales network,and our seals have been sold to more than 100 countries or areas ,Such as America, England, Canada, Australia, Russian Federation ect .
Q. What is your standard packing?
A: All the goods will be packed by carton box and loaded with pallets. Special packing methods can be accepted when needed.
Q. What is the normal lead time for product orders?
A: Generally it is 1-2 days if the goods are in stock. or it is 5-10 days if the goods are not in stock, it is according to quantity.
A: Generally it is 1-2 days if the goods are in stock. or it is 5-10 days if the goods are not in stock, it is according to quantity.
Q: Do you use any international standards for rubber products?
A: Yes, we mainly use ASTM D2000 standard to define the quality of the rubber materials, and tolerances as per ISO3302, ISO2768, etc.
A: Yes, we mainly use ASTM D2000 standard to define the quality of the rubber materials, and tolerances as per ISO3302, ISO2768, etc.
Q: What materials are available to produce from your side?
A: NBR, EPDM, SILICONE, FPM(FKM), NEOPRENE(CR), NR, IIR, SBR, ACM, AEM, Fluorosilicone(FVMQ), FFKM, Liquid Silicone, Sponge, etc.
A: NBR, EPDM, SILICONE, FPM(FKM), NEOPRENE(CR), NR, IIR, SBR, ACM, AEM, Fluorosilicone(FVMQ), FFKM, Liquid Silicone, Sponge, etc.
Q: Could you please tell us the month capacity of your products?
A: It depends on which model, we produce more than 2500 tons of rubber materials per month.
A: It depends on which model, we produce more than 2500 tons of rubber materials per month.
