High Quality Crawler Pin Disassembling Machine Chain Press Track Chain Disassembling Machine

Track pin dismantling machine introduction
YL120-200 crawler pin disassembly machine, using hydraulic energy into mechanical energy principle, crawler excavator crawler pin disassembly tool. With our products SYB-2B-S large flow manual reversing pump (suitable for field work), electric pump (220V, 380V) as the power source to make the hydraulic cylinder move forward quickly, so as to smoothly remove the pin shaft. Instead of gas cutting, manual hammering. Keep track intact. Crawler excavator maintenance, assembly tools. When first used, the oil tank must be filled with 46# hydraulic oil before testing the machine
 Track pin dismantling machine precautions
1, the pressure machine to correctly install and operate the three lead screws must ensure that the level and adjustment length is consistent
2, the machine is not allowed to correct the mold in operation;
3, the hydraulic oil is No. N46 anti-wear hydraulic oil or No. N46 low-condensate hydraulic oil, used after 80 ~ 100 mesh mesh filtration, the first oil change time is not more than two months, after every six months oil change;
4, the machine should check the cleanliness of the oil after 200 hours of work, requiring no odor, drop a drop of oil on the white filter paper, there is no ink spot in the center of the oil, otherwise the oil should be changed;
5, the press shall not be overloaded; Unbiased load
6. If the system is accidentally leaked, sufficient hydraulic oil should be added after eliminating the fault to ensure that the oil level is above 80%.
7, often check the pump station, oil tank cleaning, strictly prohibit water, dust, foreign matter into the tank;
8, such as the conversion function, the air in the system should be drained to work;
9, in the test and work, if there is an anomaly should be stopped immediately for inspection;
10. Keep the pressure for 10 minutes and allow pressure reduction of 2.5Mpa.
11, when the hydraulic system hits the high pressure, it is strictly prohibited to knock the parts, so as to avoid the danger of bursting or parts popping out.
12, the hydraulic pump station in the process of strengthening the pressure, to pay close attention to the pressure gauge digital changes, especially when the piston stroke is about to be in place, the maximum pressure display of 60MPA if it is in place, immediately hit the reversing valve to the middle or other outside a port, do not let the tubing, the cylinder in a high pressure state for a long time. Otherwise it will shorten the service life of the product!
13, in the removal of the pin must pay attention to the surrounding environment, otherwise the removal of the pin may be shot wounding.
14, in the process of pressurization, it is found that the direction of the pin out is offset, should immediately stop pressurizing, adjust the location distance of the bolts on the fixing rod of the disassembly seat. Wait for the balance before continuing pressure, in case the pin bullet flies.


FAQ
Are you manufacture?
Yes. We are one of leading manufacturers

Do you have Stock productions to sell?
Yes, of course. But we also offer OEM service. Please send us some drawing.

What information do you want to know if i want to get a quotation?
a). The model/size of your products. 

b).The application for your products. 

c).Special package methods if you needs. 

d). Raw material.

Do you inspect the finished products?
Yes.Each step of products will be carried out inspection by QC department until shipping 

What advantages do you have?
(1) Punctual: Have your orders met with the latest delivery?
We are a manufacturer with so many advanced and new machines. It ensures we have the ability to carry out the production schedule for punctual delivery.

(2) We have over 20 years experience in this industry.
That means we can preview the problems for the orders and production. Therefore, it will make sure to deduce the risk of bad situation to happen.

(3) Point to point service.
There is two sales departments who will serve you from inquiry to products shipped out. During the process, you just need to discuss with him for all the problems and the way sames much times
Our Services
1. 24 hours on line service, support Chinese, English, Spanish, French, German, Russian ,technical guidance.

2. When meets machine failure problem, our factory will ensure that the problem is solved within 1 hour.

3. Provide machine install video.

4. Provide logistics information, like shipping by sea, shipping by express DHL, FEDEX delivery, real-time tracking service.

5. If machine is broken ,Non-human causes,the new machine will be provided or new parts will be provided.