Audited Supplier
880-07 04 06H-C-LM 1044
3 Years
3 Years
P M K N S H
C
Lm
3: Partly Cylindrical, 40-60 Deg Countersink on on
4 mm
Corodrill 880 -0704-C
4
12.35 mm
0.6 mm
15 Deg
1044
Hc
PVD Tialn
4 mm
0.006 Kg
sandviks
Plastic Box and Carton
10 Pieces/Box
Sweden
8207709000
Product Description
One insert for every application
Inserts and flutes for all materials and applications ensure high productivity and longer tool life.
Stepping technique
Under normal circumstances, drilling into a workpiece with asymmetric drills creates an imbalance. Stepped technology allows drilling in steps with lower cutting forces, thus enabling higher productivity and tighter hole tolerances.
Selecting an Insert Groove
-LM - Universal chipformer
- Low cutting forces
- Preferred for machining mild steel
- Low to medium feed
-GR
- GR - Preferred for machining alloy steels and ISO-K materials
- Medium to high feed
Medium to high feed -MS
- Preferred for machining ISO-M and ISO-N materials.
- Sharp cutting edge and low cutting forces.
-Sharp cutting edges and low cutting forces.
- Low cutting forces
- Low to medium feed
Select Material
4334
- Preferred for processing ISO-P and K materials under normal service conditions
- Supplementary choice in ISO-M applications under stabilized conditions
4324
- High Wear Resistance Options for Machining ISO-P and K Materials
4344
- A safe material capable of machining a wide range of materials.
2044
- Preferred choice for processing ISO-M materials
- Complementary choice for processing ISO-S materials
N124
- Diamond Coating
- Preferred for ISO-N materials
H13A
- Uncoated material
Inserts and flutes for all materials and applications ensure high productivity and longer tool life.
Stepping technique
Under normal circumstances, drilling into a workpiece with asymmetric drills creates an imbalance. Stepped technology allows drilling in steps with lower cutting forces, thus enabling higher productivity and tighter hole tolerances.
Selecting an Insert Groove
-LM - Universal chipformer
- Low cutting forces
- Preferred for machining mild steel
- Low to medium feed
-GR
- GR - Preferred for machining alloy steels and ISO-K materials
- Medium to high feed
Medium to high feed -MS
- Preferred for machining ISO-M and ISO-N materials.
- Sharp cutting edge and low cutting forces.
-Sharp cutting edges and low cutting forces.
- Low cutting forces
- Low to medium feed
Select Material
4334
- Preferred for processing ISO-P and K materials under normal service conditions
- Supplementary choice in ISO-M applications under stabilized conditions
4324
- High Wear Resistance Options for Machining ISO-P and K Materials
4344
- A safe material capable of machining a wide range of materials.
2044
- Preferred choice for processing ISO-M materials
- Complementary choice for processing ISO-S materials
N124
- Diamond Coating
- Preferred for ISO-N materials
H13A
- Uncoated material
