Polyurethane Spray Foam Machine

Polyurea Coating Machine High Pressure Polyurea Spray Machine Polyurethane Foaming Equipment

Polyurea spraying equipment is suitable for various construction environments, and can spray multiple two-component materials: polyurea elastomer, polyurethane foam material, etc.

It can be applied to building roofing, tunnels, railways, roadbed waterproofing, foam film and television props production, pipeline inner and outer wall corrosion protection, auxiliary cofferdam engineering, storage tank and chemical storage tank corrosion protection, pipeline coating, desalinated water tank, pool waterproof and corrosion protection, chemical mine Wear-resistant, fenders and buoyancy materials, basement waterproofing, wear-resistant lining of the cabin, external wall insulation, etc., especially for intercity rail transit, high-speed rail bridge concrete surface waterproof has superior characteristics over almost all existing materials. With its advantages of environmental protection, chemical resistance, high strength, high impermeability, wear resistance, good thermal stability, flexibility and impact resistance, no joints, and strong adhesion to concrete, it effectively simplifies the number of waterproof structural design layers and reduces thickness . Due to its convenient construction process and environmental protection, it shows the unparalleled advantages of traditional waterproof and protective technologies

Advantages:

1. Using hydraulic drive, high working efficiency, more powerful and stable power.
2. Low failure rate, simple operation and easy to move.
3. Smooth commutation device to ensure equipment stability.
4. Four-fold raw material filtering device can reduce the problem of spray clogging.
5. Multiple leakage protection to protect the safety of the operator.
6. Equipped with emergency switch system, can respond to emergency situations.
7. Reliable and powerful 380V heating system can quickly heat up the raw materials to an ideal state to meet the normal construction of equipment in cold areas.
8. The whole machine is completely user-friendly design, which can store heat preservation tube group, humanized setting of equipment operation panel, easy to operate.
9. The new spray gun has small size, light weight and low failure rate.
10. The feed pump adopts a large transformation ratio method, and it can be easily fed when the raw material viscosity is high in winter.

Data Sheet:
Standard Configuration:
Main equipment: 1 set
Spray gun: 1 piece
Heating pipe: 15 meter 
1.5m pipe connecting to the gun: 1 set
Feeding pump: 2 sets
Spare parts :1 set
Tools :1 set
English manual: 1 set 
Package: plywood tray

Technical Parameter:
Ratio of raw materials: 1:1 
Viscosity range: 200~1000CPS
Output of raw materials: 4~8L/ min
Heating power: 2500W*2
Hose heating power: 2000W
Electrical source: single phase ,220v 7000w
Air source:0.5~0.8Mpa(70~120psi) ≥ 0.9m3/min
Single component output pressure: 5~10Mpa (700~1500psi)
Max.Pipe length:45m(150ft)

Shipping Parameter:
Dimension: 800x900x1550(mm)
Weight:130kg