Audited Supplier
DIN/API/ANSI/GOST Natural Rubber Sleeved PP Plastic Manual Pipe Pinch Valve
Structure & Working Principle:
| 1. Structure: a valve from the next alloy valve, rubber tubes, the size stem lock, the next column, and other derivative component parts. |
| 2.Principle:When smooth transfer vessel,stems size,benefit following the same time led board,compression tube sets for closure instead immediately opened.Thus, a guided-lock reciprocation between the opening and closing valves to complete the work,another for rubber tube or bearing small,closed at the beginning , operators when rotating the handwheel is appropriate as long as the conflict reach the opening and closing pole.Never make every effort more support,banned other tools come close. |
| 3:Application:Pinch Valve is used to replace regular valve like butterfly valve, gate valve, ball valve and so on, it is suitable for water, sewage, oil, slurry, acid or alkaline solution and so on. Especially suitable for thermal power plant, waste-flushing and ash-flushing system of steel plants, with the advantage of anti-abrasive, scaling preventing, corrosion resistance. |
Features
| - Full diameter: when tube pinch valve is fully opened, the flow channel is cylinder rubber pipeline, the diameter is equal to valve nominal diamter, without turn and crack. No eddy, no vibration, no noise and no cavitation. Suitable for high velocity fluid valve |
| - -Scaling preventing: Valve flow channel is made of rubber, with smooth inside wall, not easy to scaling.Everytime when closing and opening, scaling will be crushed away valve |
| - - Closing tightly: Rubber flow channel has the advantage of fine wraping cability, valve can been closed tightly even if there is sundries on sealing surface valve |
| - Anti-abrasive and corrosion resistance valve |
| - - No maintance: Rubber channel is the only parts meets fluid, no packing material needed, medium will not corrode other parts of valve. Service life is long, and no need maintance. |
Advantages of Manul Pinch Valves:
| 1. Very Clean | 6. Low weight |
| 2. Excellent drainage | 7. Easy operation |
| 3. Minimal turbulence | 8. Can be used in explosion-proof lines |
| 4. Low airborne contaminants | 9. Inexpensive |
| 5. Low maintenance |
Main Part & Materials:
| Part Names | Part Materials |
| Under Valve Body | Aluminium alloy,Ductile Iron,cast iron,cast steel,WCB, stainless steel |
| Lower Valve Body | Aluminium alloy,Ductile Iron,cast iron,cast steel,WCB, stainless steel |
| Lifting Board | Aluminium alloy,Ductile Iron,cast steel,WCB, stainless steel |
| Guide Stick | SS304 |
| Under Clamp Stick | SS304 |
| Lower Clamp Stick | SS304 |
| Stem | SS304 |
| Stem Nut | Copper base alloy |
| Sleeve | Natural rubber, EPDM, NBR, FPM, IIR |
| Handwheel | Ductile Iron,cast steel |
Packing & Delivery
Our Service
1.quick delivery, high quality and reasonable and fine.
2. We can make products according to the needs of customers.
3. Welcome to inquiry and purchase later in the day for us.
4. Strict quality control system .welcome third party for quality checking
5. After -sale service available, Feedback will be gave in 24hours
Certificate:
Related Product:
Primary Competitive Advantages
1.We are a factory who focus on produce valves for 30 years. Adhere to
quality is our belief.
2.All valves according the drawing to produce and 100% pressure testing,
100%material inspection.
3.There are quality certificate ISO9001,2008 SON, International Quality
Award Certificate, Manufacture License of Special Equipment, KC
of South Korea,CE of Europe.
FAQ
1, Can i get free samples?
A: Yes,we can provide you the free sample, but you need to bear their own delivery costs.
2, Can I request to change the form of packaging and transportation?
A:Yes,We can change the form of the packaging and transportation according to your
request, but you have to bear their own costs incurred during this period and the spreads.
3, Can i request to advance the shipment?
A: It should be depends on whether there is sufficient inventory in our warehouse.
4,Can i have my own Logo on the product?
A: Yes, you can send us your drawing and we can make your logo, but you have to bear
their own the cost.
5,Can you produce the products according to my own drawings?
A:Yes,we can produce the products according to your drawings that will be most
satisfy you.
6.How many days the products will be ready?
A: Generally,3 to 4 weeks,depends on the quantity.
If you're interested in our product,please feel free to contact me!
