Audited Supplier
N-181
Welding
GB
Line Fittings
Tension Clamp
Cable Drop Clamp
Nylon PA66
(ASTM G154-16 Cycle 1)
Galvanized Steel
0.7kN (Min.)
Flat or Round 2 X 4mm (Max.)
-10 Degree to +60 Degree
35g ±5g
<0.1dB
HE, as required
Bulk Packing; Palletized; as Required
Customized
China
Product Description
1.Product Image:
2.Technical Parameters and Drawings
Notes:
1. Tolerance: ±5%
2. All dimensions are in MM except for marked.
3. Customized sizes are available at request.
3.Product Description:
Key words: Drop anchor clamp, cable drop clamp, TENSOR PARA CABLE DE FIBRA ÓPTICA
Tension clamp is designed for FTTH drop cable. The drop wire clamp is widely used both indoor and outdoor installation to connect a triplex overhead entrance cable to a devices or buildings.. Provided with a serrated shim to increase hold on drop wire. Used to support one and two pair telephone drop wire at span clamps, drive hooks, and various drop attachments. The Closed hook drop wire clamps can withstand the rigors of all environmental conditions in the telecommunications outside plant. The placement of slots and a hole in the clamp's inner wedges allow for proper cable slack adjustment, tensioning and assistance with re-entry. The drop wire clamp is composed of a mandrel shaped body and an opened bail that can be locked into the clamp body. It is made out of UV resistant nylon and steel. All the assemblies passed the tensile tests, operation experience with temperatures ranging from - 60 °C up to +60 °C test, temperature-cycling test.
4.Product Details:
Type of thermoplastic material: Nylon PA66
UV protection: (ASTM G154-16 Cycle 1)
Hardware material: galvanized steel
High resistance to corrosion
Tensile strength: 0.7KN (min.)
Cable diameter and type of drop: Flat or round 2 X 4mm (Max.)
Storage and operating temperature range: -10°C to +60°C
Weight: 35g ±5g
Dimming once installed: <0.1dB
Package: bulk packing; palletized; as required
5.Packing:
2.Technical Parameters and Drawings
| HE Code | Description | Tensile Load |
| HETC0750 | Tension Clamp | 750cN |
Notes:
1. Tolerance: ±5%
2. All dimensions are in MM except for marked.
3. Customized sizes are available at request.
3.Product Description:
Key words: Drop anchor clamp, cable drop clamp, TENSOR PARA CABLE DE FIBRA ÓPTICA
Tension clamp is designed for FTTH drop cable. The drop wire clamp is widely used both indoor and outdoor installation to connect a triplex overhead entrance cable to a devices or buildings.. Provided with a serrated shim to increase hold on drop wire. Used to support one and two pair telephone drop wire at span clamps, drive hooks, and various drop attachments. The Closed hook drop wire clamps can withstand the rigors of all environmental conditions in the telecommunications outside plant. The placement of slots and a hole in the clamp's inner wedges allow for proper cable slack adjustment, tensioning and assistance with re-entry. The drop wire clamp is composed of a mandrel shaped body and an opened bail that can be locked into the clamp body. It is made out of UV resistant nylon and steel. All the assemblies passed the tensile tests, operation experience with temperatures ranging from - 60 °C up to +60 °C test, temperature-cycling test.
4.Product Details:
Type of thermoplastic material: Nylon PA66
UV protection: (ASTM G154-16 Cycle 1)
Hardware material: galvanized steel
High resistance to corrosion
Tensile strength: 0.7KN (min.)
Cable diameter and type of drop: Flat or round 2 X 4mm (Max.)
Storage and operating temperature range: -10°C to +60°C
Weight: 35g ±5g
Dimming once installed: <0.1dB
Package: bulk packing; palletized; as required
5.Packing:
