

1.The lateral pressure tension sensor is a double-hole shear beam structure, which is convenient to install and use, simple to operate and easy to maintain, and is specially used to measure the tension of steel wire rope. The wire rope is fixed on the sensor through U-bolt. When the wire rope is pulled, the force is applied to the sensor through the steering wheel.


Parameter Table | |||
Measuring Range | 0-200KN | Material | Alloy steel |
Output Sensitivity | 1.5±0.05mV/V | Resistance | 350/700Ω |
Zero Output | ±1%F.S. | Insulance | ≥5000MΩ/100VDC |
Non-Linear | 0.5%F.S. | Operating voltage | 10-15v |
Hysteresis | 0.5%F.S. | Operating temperature range | -20-80ºC |
Repeatability | 0.3%F.S. | Safety overload | 150% |
Creep(30min) | 0.3%F.S. | Ultimate overload | 200% |
Temp.effect on output | 0.05% F.S. / 10ºC | Cable specification | Φ5x3m |
Temp.effect on zero | 0.05% F.S. / 10ºC | Cable ultimate tension | 10kg |
Response frequency | 10kHz | TEDS |




1. Can I custom it?
Yes, custom order is highly welcome.
2. Can I order a sample? Is it free?
Yes, The sample is available, but you have to pay for it.
3. What's the leading time?
As a factory, all goods can be dispatched within 1 week.