Audited Supplier
HXM418-I
24 Hours Service Online
24 Months
Plastic Injection Molding Machine
Horizontal
PS, ABS, PP, PE, HDPE, PA, EVA
Screw Type
Hydraulic & Mechanical
Automatic
Computerized
CE, ISO9001:2008
Servo Energy Saving
Engineers Available to Service Machine
380V/50Hz, According to Countries
Malaysia, Russia, Turkey, Uzbekistan
New
1200g PS
770*720
13.7 Ton
710 mm
Highsun
Standard Package
6.50x1.75x2.08
China
8477101090
Product Description
1.Picture
Product Advantages:
a. Super energy saving
Output power varies with the load, and no energy is wasted. In the holding pressure phase, the servo motor will reduce speed, with low energy consumption; during the cool-down period, the motor does not work, with zero power consumption. Compared with the ordinary injection molding machines, it can save 20%-80% of the power.
b. Hiigh precision and high stability
Equipped with the precise pressure sensor and rotary encoder, it can respectively monitor and feed back on flow and pressure. Based on the feedback, the high performance synchronous servo motor will adjust flow and pressure accordingly by changing the speed and torque. The closed-loop control can ensure the stability of product quality.
c. High response and high efficiency
The driving system responses with high sensitivity . It takes only 0.05 seconds to reach maximum value. The response speed is much faster than the ordinary injection molding machines. In that way, it significantly shortens the cycle time and increases the production efficiency.
2.Application
3.Processing,assembling production line
5.Loading containers
6. Customer case
Client in China produce shoe for many famous companies
7.Client in Malaysia
| MODEL:HXM418-I | |||||
| TECHNICAL PARAMETER TABLE | A | B | |||
| INJECTION UNIT | SCREW DIAMETER | mm | 65 | 70 | |
| SCREW L/D RATIO | L/D | 22 | 21 | ||
| INJECTION CAPACITY IN THEORY150130112882 | cm3 | 1128 | 1308 | ||
| INJECTION WEIGHT(PS) | g | 1026 | 1200 | ||
| oz | 36.1 | 41.9 | |||
| INJECTION PRESSURE | MPa | 198 | 171 | ||
| INJECTION RATE | g/s | 307 | 356 | ||
| PLASTICIZING CAPACITY | g/s | 42 | 47 | ||
| SCREW SPEED | rpm | 160 | |||
| CLAMPING UNIT | CLAMPING FORCE | KN | 4180 | ||
| MOVING MOULD-PLATE STROKE | mm | 710 | |||
| MAX. MOULD HEIGHT | mm | 800 | |||
| MIN. MOULD HEIGHT | mm | 280 | |||
| SPACE BWTWEEN TIE-BARS (W×H) | mm | 770*720 | |||
| HYDRAULIC EJECTOR FORCE | kN | 134 | |||
| HYDRAULIC EJECTOR STROKE | mm | 180 | |||
| EJECTOR NUMBER | n | 13 | |||
| OTHERS | PUMP PRESSURE | MPa | 17.5 | ||
| MOTOR /DRIVING POWER | KW | 38 | |||
| HEATING CAPACITY | KW | 23.15 | |||
| MACHINE DIMENSION (L×W×H) | m | 7.43*1.93*2.25 | |||
| MACHINE WEIGHT | t | 13.7 | |||
| OIL TANK CAPACITY | L | 680 | |||
a. Super energy saving
Output power varies with the load, and no energy is wasted. In the holding pressure phase, the servo motor will reduce speed, with low energy consumption; during the cool-down period, the motor does not work, with zero power consumption. Compared with the ordinary injection molding machines, it can save 20%-80% of the power.
b. Hiigh precision and high stability
Equipped with the precise pressure sensor and rotary encoder, it can respectively monitor and feed back on flow and pressure. Based on the feedback, the high performance synchronous servo motor will adjust flow and pressure accordingly by changing the speed and torque. The closed-loop control can ensure the stability of product quality.
c. High response and high efficiency
The driving system responses with high sensitivity . It takes only 0.05 seconds to reach maximum value. The response speed is much faster than the ordinary injection molding machines. In that way, it significantly shortens the cycle time and increases the production efficiency.
2.Application
3.Processing,assembling production line
5.Loading containers
6. Customer case
Client in China produce shoe for many famous companies
7.Client in Malaysia
