Audited Supplier
Product Description:
The wire drawing machine is used to draw the wire diameter from big to small.
Finished small wire can be used to make nails, binding wire, welding mesh etc. construction site.
| Model | LZ-560 |
| Raw material | Low-carbon steel wire,wire tensile strength≤550MPa |
| Number of blocks | Max.12pcs |
| Input wire diameter | 8.0mm, 6.5mm,5.5mm |
| Output wire diameter | 4mm, 3mm, 2.5mm,2.2mm, 2mm,1.8mm,1.6mm, etc |
| Each motor capacity | 22kw |
| Drawing speed | Max.16-18m/s |
| Each block weight | 1500KGS |
1.Upper pull-out wire rack is used to feed the wire material.
2.Sheller is used to clean steel rust and oxide coating on wire surface.
3. Wire pointing & inserting machine is used to make the wire head sharp, then insert into the drawing die directly.
4.Butt welding machine is used to connect new wire coil when one is finished.
5.Trunk type wire coiling machine is used to coil the finished wire.
6.Wire coiling machine is used to coil the finished wire.
After-sale:
1.Guarantee time: One or two years since the machine was installed at buyer's factory but within 18 months from shipment date.
2.Within guarantee time, if the parts are broken, we will send you new one for free.
3.We can supply manual book, electric drawing, machine layout, installation video, etc. and our engineer can go to your factory to help you install the machine.
4.After guarantee time, we can supply technical support on line.
