Audited Supplier
GH3030
Nicr
Wire
Polishing
Cold Drawing
Soft State
Metal Thick Wire
High Temperature Alloy Gh3030 Gh30 Xh78t
Bright,Polished
for Turbine Engine Combustor Components
Bal.Nickel, 20%Chromium,0.25%Ti+Fe+Mn+Si+Al
Ualloy
1.09+/-5%
8.4G/Cm3
Common Sizes in Stock
Ualloy
Wooden Case
GJB 3165-1998/GJB 2611-1996
China
75052200
Product Description
High temperature alloy GH3030 GH30 XH78T Nickel alloy sheet/plate
(Common Name: GH30, ЭИ435, XH78T)GH3030, solid solution strengthened superalloy with simple chemical composition, satisfactory thermal strength and high plasticity below 800ºC, and good performance in oxidation resistance, thermal fatigue, cold stamping and welding process. It is monocrystalline austenite structure after solution treatment, and the structure is stable during use.
The other form we can offer:
FAQ
1. What's the minimum quantity customer can order?
If we have your size in stock, we can provide any quantity you want.
If the size is not in stoct, our MOQ will be 50kgs.
2. How can you pay for small sample amount?
We have Western union account, wire transfer for sample amount also ok.
3. Customer do not have express account. How will us arrange the delivery for sample order?
Just need to provide your address information, we will check the express cost, you can arrange the express cost together with sample value.
4. What's our payment terms?
We can accept LC T/T payment terms, it also depending on delivery and total amount. Let's talk more in details after getting your detailed requirements.
5. Do you provide free samples?
If you want several meters and we have stock of your size, we can provide, customer need to bear the International express cost.
6. What's our working time?
We will give you reply through email/phone Online contact tool within 24 hours. No matter working day or holidays.
(Common Name: GH30, ЭИ435, XH78T)
GH3030, solid solution strengthened superalloy with simple chemical composition, satisfactory thermal strength and high plasticity below 800ºC, and good performance in oxidation resistance, thermal fatigue, cold stamping and welding process. It is monocrystalline austenite structure after solution treatment, and the structure is stable during use.
It mainly used for turbine engine combustor components operating below 800ºC and other high temperature components requiring oxidation resistance but low load below 1100ºC,such as combustion chambers and afterburners and the mounting edge of the casing.
Normal composition%
| C | Cr | Ni | Ti | Al | Fe | Mn | Si | P | S | Cu |
| ≤0.12 | 19.0-22.0 | Bal. | 0.15-0.35 | ≤0.15 | ≤1.5 | ≤0.7 | ≤0.8 | ≤0.02 | ≤0.02 | ≤0.20 |
Typical Mechanical properties
| Tensile Strength | Elongation |
| Mpa | % |
| 785 | ≥25 |
Typical Physical properties
| Density (g/cm3) | 8.4 |
| Electrical resistivity at 20ºC(10-6ohm.m) | 1.09 |
| Conductivity coefficient at 100ºC (λ/(W/(m·ºC)) | 15.1 |
| Specific heat capacity at 150ºC(J/(kg·ºC)) | 565.2 |
| Magnetic properties | None |
The other form we can offer:
FAQ
1. What's the minimum quantity customer can order?
If we have your size in stock, we can provide any quantity you want.
If the size is not in stoct, our MOQ will be 50kgs.
2. How can you pay for small sample amount?
We have Western union account, wire transfer for sample amount also ok.
3. Customer do not have express account. How will us arrange the delivery for sample order?
Just need to provide your address information, we will check the express cost, you can arrange the express cost together with sample value.
4. What's our payment terms?
We can accept LC T/T payment terms, it also depending on delivery and total amount. Let's talk more in details after getting your detailed requirements.
5. Do you provide free samples?
If you want several meters and we have stock of your size, we can provide, customer need to bear the International express cost.
6. What's our working time?
We will give you reply through email/phone Online contact tool within 24 hours. No matter working day or holidays.
