Audited Supplier
Characteristics of ceramic fiber board:
1.Low heat conduction and capacity
2.Good thermal stability and tensile shock performance
3.High compressive strength and good toughness
Application field of ceramic fiber board:
Ceramic fiber board is suitable for industrial kiln wall lining, masonry insulation layer;Heat insulation layer for high temperature equipment;High temperature kiln kiln lining kiln car protection door baffle and furnace temperature divider;Aviation dock heat insulation fire insulation insulation
Ceramic fiber board is classified by temperature:
Ordinary :1100ºC
Standard:1260ºC
High purity type:1360ºC
Containing zirconium type:1430ºC
Typical Applications
• Furnace, Kiln, and Oven hot face and backup linings • Flue and Chimney linings, Hot gas duct lining
• Consumer appliances like ovens, water heaters, night storage heaters • Gaskets, Seals, Expansion joints
• Heat Shields for personal protection • Heat processing equipment
| Item | STD-BOARD | HA-BOARD | HZ-BOARD | IN-BOARD | BIO-BOARD | |
| Classification Temperature, °C | 1260 | 1350 | 1430 | 1260 | 1260 | |
| Continuous Use Temperature, °C | 1100 | 1250 | 1350 | 1100 | 1100 | |
| Density, kg/m3 | 220-360 | |||||
| color | white | |||||
| Loss of Ignition, LOI, % | ≤8 | ≤1.5 | ≤8 | |||
| Permanent Linear Shrinkage, %, 24 hours | ≤3(1000ºC) | ≤3(1200ºC) | ≤3(1350ºC) | ≤3(1000ºC) | ≤3(1000ºC) | |
| Compressive strength, 10% deformation, MPa | >=0.2 | |||||
| Thermal Conductivity, W/m•K | 200ºC | 0.06 | 0.06 | 0.06 | 0.06 | 0.06 |
| 400ºC | 0.07 | 0.07 | 0.07 | 0.07 | 0.07 | |
| 600ºC | 0.12 | 0.12 | 0.12 | 0.12 | 0.12 | |
| 800ºC | 0.15 | 0.15 | 0.15 | 0.15 | 0.15 | |
| 1000ºC | 0.19 | 0.19 | 0.18 | 0.19 | 0.19 | |
| Chemical Composition, % | Al2O3 | >=42 | >=52 | >=34 | >=42 | - |
| SiO2 | >=53 | >=46 | >=45 | >=53 | >=68 | |
| ZrO2 | - | - | >=15 | - | - | |
| CaO | - | - | - | - | >=20 | |
| MgO | - | - | - | - | >=10 | |
Our company has professional and strict quality control for all the products. We have passed CE certificate on 2016.
And we also passed MSDS, ISO9001 quality management system certification and REACH etc.
Q1:What is your payments terms?
A1 : 30% T/T in advance, 70% balance to be against the BL copy or by LC, or other payment terms.
Q2 : What is your lead time?
A2 : It usually needs about 10- 20 days after receiving your deposit.
Q3 : How can you control your quality?A3 : For each production processing, SJOIN have complete QC system for the chemical composition and Physical properties. After production, all the goods will be tested, and the quality certificate will be shipped along with goods if needed.
Q4 : Do you provide free samples?
A4 : Yes, free samples are available.
Q5 : Can we visit your company?
A5 : Yes, of course, welcome to SJOIN Company.
